杨帆,男,1978年3月生,博士后,副研究员。在1999、2001和2006年毕业于哈尔滨工业大学,分获材料科学专业学士、材料物理与化学专业硕士与博士学位,2006年进入东南大学材料科学与工程博士后流动站从事高速大应变连续拉拔钢丝的研究。2008年进入东南大学能源与环境学院太阳能技术研究中心,2012.8至2013.8受国家留学基金委资助,在瑞典皇家工学院NANOSOFC课题组以访问学者身份开展太阳能及燃料电池联合应用的研究。
|
|
|
|
|
国家自然科学基金:共析钢连续大应变拉拔过程形变珠光体精细结构、织构与应力演化 (50901020) 主持,2010.1-2012.12. 教育部博士点新教师基金: 高效拟抛物面聚光器研究(20090092120008) 主持,2010.1-2012.12.
|
|
|
|
|
Selected papers F. Yang, W.D. Fei. Evaluation of Texture in Pb(Zr0.52Ti0.48)O3 Films Prepared by Sol-gel Route. Key Engineering Materials, 2005, 280-283: 857-860. (SCI) F. Yang, L.Wang, W.D. Fei., Crystallization Behavior of Pb(Zr,Ti)O3 Films Prepared by Sol-gel Route, Journal of Materials Science, 2006, 41(18): 5820-5827. (SCI) F. Yang, W.D. Fei. Effect of Reannealing Treatment in Alternating Electrical Field on the Residual Strain in Sol-gel Derived F. Yang, W.D. Fei, J.Q. Jiang. An Alternative Micro-area X-ray Diffraction Method for Residual Stress Measurement of Pb(Zr,Ti)O3 Film. Surface & Coatings Technology.2007, 202(1): 121-125.(SCI) F. Yang, J.Q. Jiang, F. Fang. Rapid Determination of Residual Stress Profiles in Ferrite Phase of Cold Drawn Wire by XRD and Layer Removal Technique. Materials Science and Engineering A. 2008, 486(1-2):455-460.(SCI) F. Yang, Y. Wang, J. Q. Jiang. Stress Evolution of Cold Drawn Pearlitic Steel Wire Subjected to Uniaxial Tension. Materials Science and Engineering A, 2008,487(1-2): 468-472.(SCI) F. Yang, J.Q. Jiang. Residual Stress in Pearlitic Steel Rods During Progressively Cold Drawing Measured by X-ray Diffraction. Materials Letters. 2008, 62(15): 2219-2221.(SCI) F. Yang, C. Ma, J.Q.Jiang, H.P. Feng, S.Y. Zhai. Effect of cumulative strain on texture characteristics during wire drawing of eutectoid steels. Scripta Materialia. 2008, 59(8): 850-853 (SCI) Yang Fan, Jiang Jianqing, Fang Feng,Wang Yan. Microstructure and Residual Stress of Cold Drawn Pearlitic Wires. Rare Metal Materials and Engineering. 2010,39(S1):491-495.(SCI)
|
|
|
|
|
刘静静,《待定》,硕士研究生,2011.9—至今。 刘伟,《待定》,硕士研究生,2012.9—至今。
|
|
|
|
|
|