培养方案
首页  研究生培养  培养方案 当前位置:

 一、博士、学术型硕士研究生培养方案

东南大学博士研究生培养方案

博士研究生培养方案\ Doctoral Candidate Academic Program

动力工程及工程热物理


(学科代码:0807


科简介


学科由中国锅炉学创始人范从振、汽轮机学创始人王守泰、热工学创始人夏彦儒和热工控制学创始人钱钟韩在国立中央大学(本校前身)创建,是中国动力工程及工程热物理学科的发源地之一,至今已培养出包括7名中国科学院/工程院院士在内的近万名热能动力类高级专门人才。本学科是江苏省优势学科和东南大学“985工程”、“211工程”、“双一流”重点建设学科,内含热能工程、工程热物理、动力机械及工程、制冷与低温工程、流体机械及工程等二级学科,其中热能工程为国家重点学科、制冷与低温工程为江苏省重点学科。拥有火电机组振动国家工程研究中心、能源热转换及其过程测控教育部重点实验室、江苏省污染治理与资源化工程技术研究中心江苏省太阳能技术重点实验室等科研基地。


培养目标


掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在动力工程和工程热物理等方面,具有坚实的理论基础、系统的专门知识和良好的创新精神,胜任攻关复杂基础问题,进行基础理论创新和先进技术研发的工作。具备在能源动力领域开展先进科学研究、解决重大技术问题和培养高水平人才的领军能力。至少熟练掌握一门外语,具备国际交流能力和国际竞争力。



研究方向


1)流体流动与传热传质;(2)燃烧与污染控制技术;(3)热工测量与自动化控制;(4)热力系统仿真、优化与诊断;(5)动力机械振动分析及应用;(6)制冷与空调技术;(7)新能源技术


培养年限


博士生培养学制为4年,最长可延至6年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

在论文选题及研究方向范围内至少阅读文献200篇,其中外文文献100篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于2.5年。

本学科申请博士学位前应发表学术成果要求按照学校相关规定执行。


预答辩报告

在学位论文工作基本完成以后,博士生应当进行论文工作总结报告,邀请五名以上同行专家对论文工作的主要成果和创新性等进行评议,同行专家应当为本学科或相关学科博士生指导教师或具有正高级专业技术职务的专家,其中半数以上应当具有博士生指导资格。

预答辩报告通过后方可申请答辩,进行学位论文送审。


附表:

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况


中国概况


博士英语


32

2



留学生选汉语


汉语

公共

选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1




专业

必修课

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003131

制冷空调专题

秋季

48

3

讲课+讨论

笔试

B003136

热工测量与控制专题

春季

48

3

面授讲课

笔试

B003138

热工过程建模与仿真专题

春季

48

3

面授讲课

笔试

B003140

燃烧专题

春季

48

3

面授讲课

笔试

专业

选修课

B003105

工程热物理专题

秋季

32

2

讲课+讨论

笔试

至少跨一级学科选修课程1

B003118

多变量控制系统

春季

32

2

讲课+讨论

笔试

B003133

制冷新技术

春季

32

2

讲课+讨论

笔试

B003135

生物质热化学转化制备燃料与化学品

秋季

32

2

讲课+讨论

笔试


其他新开课程






教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

须参加境外学术交流活动。

2


考查



:1.博士生课程总学分至少13学分,其中必修课至少8学分;

2. 必修课一般应在入学后一年内完成;

3.必修课程根据此表,选修课程从研究生课程目录中选择。







DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:080700)



Brief Introductionto Discipline


 The discipline was founded by Fan Congzhen, founder of Chinese boiler science, Wang Shoutai, founder of steam turbines, Xia Yanru, founder of thermal engineering, and Qian Zhonghan, founder of thermal control science, at the National Central University (predecessor of the University), which is one of the birthplaces of Chinas Power Engineering and Engineering Thermophysics disciplines. Up to now, nearly 10,000 senior engineers in thermal power including 7 academicians of the Chinese Academy of Sciences/Engineering have been trained. This discipline is a dominant discipline in Jiangsu Province, the “985 Project”, “211 Project” and “Double First-class”key construction disciplines of Southeast University, including several second-class disciplines like thermal engineering, engineering thermophysics, power machinery and engineering, refrigeration and cryogenic engineering, fluid machinery and engineering, in which thermal engineering is a national key discipline, refrigeration and cryogenic engineering is a key discipline in Jiangsu Province. It has scientific research bases such as National Engineering Research Center of Turbogenerator Vibration, Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Jiangsu Engineering Research Center for pollution treatment and resource utilization, and the Key Laboratory of Solar Energy Technology of Jiangsu Province.


Objectives


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of energy and power, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) fluid flow and heat and mass transfer; (2) combustion and pollution control technology; (3) thermal measurement and automation control; (4) thermal system simulation, optimization and diagnosis; (5) dynamic mechanical vibration analysis and application; (6) refrigeration and air conditioning technology; (7) new energy technology.


Duration

4 years usually, and no more than 6 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.



Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Studentsare required to read at least200 literatures (including 100 literatures written in foreign languages) related to their dissertation and research direction,and writea review.


DissertationWriting

In addition to compliance with the provisions of SEU, doctoral dissertation must be written in a systematic and completemanner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation

 Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least 2.5 years research related to the dissertation.

Assessment standard of doctoral degree for doctoral candidates in Southeast University.




Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2



international students only

Introduction to China

32

2




Academic English for Doctoral  Students


32

2



international students only

Chinese Language

32

2



Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1





Leadership


16

1




Specialized Compulsory Courses  

B003134

Frontier of the discipline

Autumn

54

3

Lecture + discussion

written exam

at least 1 course

B003131

Refrigeration and air conditioning

Autumn

54

3

Lecture + discussion

written exam

B003136

Thermal measurement and control

Spring

54

3

Lecture

written exam

B003138

Thermal Process Modeling and Simulation

Spring

54

3

Lecture

written exam

B003140

Combustion

Spring

54

3

Lecture

written exam

Specialized Elective Courses

B003105

Engineering Thermophysics

Autumn

36

2

Lecture + discussion

written exam

at least 1 interdisciplinary course

B003118

Multivariable control system

Spring

36

2

Lecture + discussion

written exam

B003133

New refrigeration technology

Spring

36

2

Lecture + discussion

written exam

B003135

Biomass thermochemical conversion to produce fuels and chemicals

Autumn

36

2

Lecture + discussion  

written exam

Integrated Quality Training

Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

 Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.  

2


Non-exam  


Note:  

 1. After registration, the students are normally required to complete 13 credits for all the courses, including 8 credits for compulsory courses.

 2. All compulsory courses are normally required to be completed within one year after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.




9


博士研究生培养方案\ Doctoral Candidate Academic Program

供热、供燃气、通风及空调工程


(学科代码:081404


科简介300字以内


供热、供燃气、通风与空气调节工程是一门技术性和实用性很强的工程学科。随着建筑节能、智能化楼宇、生态建筑和建筑环境等技术的发展,该学科在我国应用前景与发展潜力十分巨大。我校从上世纪90年代初期开始,先后在新型制冷空调技术、楼宇自动化、建筑节能与建筑环境等领域开展了有关的研究。10多年来,承担了一批国家支撑项目、863973、重点研发、国家自然科学基金和省部级重点科研项目,取得了一系列在国内处于领先水平的研究成果,有的已达到国际先进水平,并在国内外产生了一定影响。多年来该学科与美国、英国、意大利、日本、新西兰、新加坡和香港等国家和地区的高等学校与研究所建立了长期的合作关系。


培养目标150字以内,以下内容仅供参考

掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在供热、供燃气、通风与空气调节工程等方面,具有坚实、宽广的理论基础和系统深入的专门知识。具有独立开展科学研究和解决有关技术问题的能力。能胜任科学研究、教学等方面的工作。至少熟练掌握一门外语。



研究方向


1)空调与制冷设备新技术,(2)可再生能源利用与建筑节能,(3)楼宇智能化,(4HVAC系统先进技术,(5)室内空气品质分析与控制


培养年限


博士生培养年限一般为3—4年,最长可延至6年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

在论文选题及研究方向范围内至少阅读文献100篇,其中外文文献50篇,完成一篇综述。

论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于2年。申请博士学位前至少必须满足如下条件之一:1、在 SCIE/SSCI源刊上发表学术论文二篇,其中在 JCR 分区表 中指定相应学科领域 Q1Q2 区期刊学术论文至少一篇;2、在 SCIE/SSCI源刊或 EI/CSCD(核心版)源刊上发表学术论文三篇,其中被 SCIE/SSCI收录学术论文至少二篇;3、在 SCIE/SSCI源刊上发表被 SCIE/SSCI收录学术论文二篇,且获授权国家发明专利一件。


附表:



课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况


中国概况


博士英语


32

2



留学生选汉语


汉语

公共

选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1




专业

必修课

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003131

制冷空调专题

秋季

48

3

讲课+讨论

笔试

B003132

热工测量与控制专题

春季

48

3

面授讲课

笔试

B003138

热工过程建模与仿真专题

春季

48

3

面授讲课

笔试

B003140

燃烧专题

春季

48

3

面授讲课

笔试

专业

选修课

B003105

工程热物理专题

秋季

32

2

讲课+讨论

笔试

至少跨一级学科选修课程1

B003118

多变量控制系统

春季

32

2

讲课+讨论

笔试

B003133

制冷新技术

春季

32

2

讲课+讨论

笔试

B003135

生物质热化学转化制备燃料与化学品

秋季

32

2

讲课+讨论

笔试


其他新开课程






教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

理、工、医、经管须参加境外学术交流活动;其它学科须参加全国性学术交流活动,鼓励参加境外学术交流。

2


考查



:1.博士生课程总学分至少13学分,其中必修课至少8学分;

2. 必修课一般应在入学后一年内完成;

3.必修课程根据此表,选修课程从研究生课程目录中选择。




DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:080700)



Brief Introductionto Discipline (within 300 words)


Heating, ventilation and air conditioning is a technical and practical engineering discipline. With the development of technologies such as building energy conservation, intelligent buildings, ecological buildings and building environment, the application and development of HVAC show great potential in China. Since the early 1990s, our school has carried out related research in the fields of new refrigeration and air-conditioning technology, building automation, building energy conservation and building environment. Over the past 10 years, a number of projects, such as national support projects, 863 program, 973 program, key research and development projects, the National Natural Science Foundation and provincial and ministerial-level key scientific research projects, have been launched and a series of research results at leading level in China have been achieved, some of which are international advanced and has a certain impact at home and abroad. Over the years, long-term cooperative relationships with universities and research institutes in the United States, Britain, Italy, Japan, New Zealand, Singapore and Hong Kong have been established on the discipline.


Objectives (about 150 words;the followingis for reference only)


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of energy and power, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

  1.  New technology for air conditioning and refrigeration equipment;

  2.  Renewable energy utilization and building energy conservation;

  3.  Intelligent building;

  4.  Advanced technology of HVAC system;

  5.  Indoor air quality analysis and control.


Duration

3-4 years usually, and no more than 6 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

in accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.



Interim Assessment

in accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

including requirements on literature reading, thesis writing, publication, etc.


Literature Reading (for reference only,)

Students are required to read at least 100 literatures (including 50 literatures written in foreign languages) related to their dissertation and research direction, and write a review.


DissertationWriting(for reference only)

In addition to compliance with the provisions of University, doctoral dissertation must be written in a systematic and complete manner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation(for reference only)

 Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least two years research related to the dissertation. At least one of the following conditions must be met before being eligible for applying for a Doctor's Degree: 1. Publish two academic papers in the SCIE/SSCI source journals, including at least one of the Q1 and Q2 journal academic papers in the corresponding subject area in the JCR partition table; 2. Publish three academic papers in SCIE/SSCI Source Journals or EI/CSCD (Core Edition) Source Journals, including at least two academic papers indexed by SCIE/SSCI; 3. Publish two academic papers in SCIE/SSCI Source Journals and one authorized national invention patent.




Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2



international students only

Introduction to China

32

2




Academic English for Doctoral  Students


32

2



international students only

Chinese Language

32

2



Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1





Leadership


16

1




Specialized Compulsory Courses  

B003134

Frontier of the discipline

Autumn

48

3

Lecture + discussion

written exam

at least 1 course

B003131

Refrigeration and air conditioning

Autumn

48

3

Lecture + discussion

written exam

B003132

Thermal measurement and control

Spring

48

3

Lecture

written exam

B003138

Thermal Process Modeling and Simulation

Spring

48

3

Lecture

written exam

B003140

Combustion

Spring

48

3

Lecture

written exam

Specialized Elective Courses

B003105

Engineering Thermophysics

Autumn

32

2

Lecture + discussion

written exam

at least 1 interdisciplinary course

B003118

Multivariable control system

Spring

32

2

Lecture + discussion

written exam

B003133

New refrigeration technology

Spring

32

2

Lecture + discussion

written exam

B003135

Biomass thermochemical conversion to produce fuels and chemicals

Autumn

32

2

Lecture + discussion  

written exam

Integrated Quality Training

Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

 Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.  

2


Non-exam  


Note:  

 1. After registration, the students are normally required to complete 13 credits for all the courses, including 8 credits for compulsory courses.

 2. All compulsory courses are normally required to be completed within one year after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.





博士研究生培养方案\ Doctoral Candidate Academic Program

环境科学与工程


(学科代码:0830


科简介


东南大学环境学科拥有悠久的发展历史,从上世纪40年代初期中央大学土木工程系设置的卫生工程学组算起,已有70多年的历史。恢复高考后,我校是教育部直属第一批5所全国最早创办环境工程专业的院校(1979年)。本学科具有环境学科博士、硕士、本科和继续教育的完整教学体系。学科拥有“985工程”经费资助建设的“环境科学与工程实验中心”、“江苏省污染控制及资源化工程技术研究中心”,以及与环境学科相关的“能源热转化及其过程测控教育部重点实验室”,并与公共卫生学院共建“东南大学环境医学工程教育部重点实验室”,具有完备的供博士后研究人员开展科学研究的基础条件。



培养目标


掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在环境科学与工程等方面,具有坚实的理论基础、系统的专门知识和良好的创新精神,胜任攻关复杂基础问题,进行基础理论创新和先进技术研发的工作。具备在环境保护与污染防治领域开展先进科学研究、解决重大技术问题和培养高水平人才的领军能力。至少熟练掌握一门外语,具备国际交流能力和国际竞争力。


研究方向


1)水污染控制与水深度处理;(2)大气污染控制和废气净化;(3)固体废弃物处理处置与资源化;(4)湖泊富营养化控制和生态修复;(5)饮用水安全保障理论与技术;(6)燃煤大气污染防治


培养年限


博士生培养学制为4年,最长可延至6年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。


学位论文


文献阅读(仅供参考,下同)

在论文选题及研究方向范围内至少阅读文献200篇,其中外文文献100篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于2.5年。

本学科申请博士学位前应发表学术成果要求按照学校相关规定执行。


预答辩报告

在学位论文工作基本完成以后,博士生应当进行论文工作总结报告,邀请五名以上同行专家对论文工作的主要成果和创新性等进行评议,同行专家应当为本学科或相关学科博士生指导教师或具有正高级专业技术职务的专家,其中半数以上应当具有博士生指导资格。

预答辩报告通过后方可申请答辩,进行学位论文送审。


附表:

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况

B000113

中国概况


博士英语


32

2



留学生选汉语


汉语

公共

选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1




专业

必修课

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003132

大气环境专题

秋季

48

3

讲课+讨论

笔试

B003137

水环境专题

秋季

48

3

面授讲课

笔试

专业

选修课

B003139

人工环境建模与仿真

春季

32

2

讲课+讨论

笔试

至少跨一级学科选修课程1


其他新开课程






教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

参加境外学术交流活动。

2


考查



:1.博士生课程总学分至少13学分,其中必修课至少8学分;

2. 必修课一般应在入学后一年内完成;

3.必修课程根据此表,选修课程从研究生课程目录中选择。




DisciplineEnvironmental Science and Engineering


(Discipline Code: 0830)



Brief Introductionto Discipline (within 300 words)


Southeast University Environmental Science has a long history of development. It has more than 70 years since the health engineering group set up by the Civil Engineering Department of the Central University in the early 1940s. After the resumption of the college entrance examination, our school is one of the first five institutions in the country to establish environmental engineering under the Ministry of Education (1979). The discipline has a complete teaching system for doctoral, master, undergraduate and continuing education. With foundation of the “985 Project”, the discipline has the “Environmental Science and Engineering Experiment Center”, the “Jiangsu Provincial Pollution Control and Resource Engineering Technology Research Center”, and the “Energy Thermal Transformation and Process Measurement and Control Department of the Ministry of Education” which is related to environmental disciplines. Meanwhile it has the “Key Laboratory of Environmental Medical Engineering of the Southeast University” which is established with the School of Public Health. The discipline has complete basic conditions for postdoctoral researchers to carry out scientific research.



Objectives (about 150 words;the followingis for reference only)


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of environmentalscience and engineering, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, teaching, etc.Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) Water pollution control and water treatment, (2) Air pollution control and exhaust gas purification, (3) Solid waste treatment and disposal, (4) Lake eutrophication control and ecological restoration, (5) Drinking water safety assurance theory and technology, (6) Prevention and control of coal-fired air pollution



Duration

4 years usually, and no more than 6 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.



Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Studentsare required to read at least 200 literatures (including 100 literatures written in foreign languages) related to their dissertation and research direction and writea review.


DissertationWriting

In addition to compliance with the provisions of SEU, doctoral dissertation must be written in a systematic and completemanner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation

 Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least 2.5 years research related to the dissertation.

Assessment standard of doctoral degree for doctoral candidates in Southeast University.



Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2




B000113

Introduction to China

32

2



international students only


Academic English for Doctoral  Students


32

2





Chinese Language

32

2



international students only

Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1





Leadership


16

1




Specialized Compulsory Courses  

B003134

Frontier of the discipline

Autumn

48

3

Lecture + discussion

written exam

at least 1 course

B003132

Topic on atmospheric environment

Autumn

48

3

Lecture + discussion

written exam

B003137

Topic on water environment

Autumn

48

3

Lecture + discussion

written exam

Specialized Elective Courses

B003139

Artificial environment modeling and simulation

Spring

32

2

Lecture + discussion

written exam

at least 1 interdisciplinary course


Other new courses






Integrated Quality Training

Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including compulsory lectures on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

 Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.  

2


Non-exam  


Note:  

 1. After registration, the students are normally required to complete 13 credits for all the courses, including 8 credits for compulsory courses.

 2. All compulsory courses are normally required to be completed within one year after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.




博士研究生培养方案\ Doctoral Candidate Academic Program

能源动力(工程博士)


(类别代码:0858


类别简介400字以内


本类别可追溯到国立东南大学时期的热工课题组和电机工程系,近百年的历史积淀。本类别立足于能源、环境和电气工程交叉领域中的科学和工程技术问题,拥有雄厚的建设基础,包括国家 “985工程”、“211工程”,东南大学“双一流”重点建设学科,国家重点学科,江苏省一级学科重点学科,江苏省国家一级重点学科培育建设点和江苏省优势学科等。类别设有一系列高水平的科学研究基地和工程技术平台,包括火电机组振动国家工程研究中心、国家级工程实践教育中心、能源热转换及其过程测控教育部重点实验室、伺服控制教育部技术工程中心、江苏省污染治理与资源化工程技术研究中心、江苏省太阳能技术重点实验室、江苏省智能电网技术与装备重点实验室、江苏省电力工程实验中心等,并与公共卫生学院共建“东南大学环境医学工程教育部重点实验室”。在类别领域的基础研究、应用研究、高新技术开发及产业化等方面取得了显著成果,具有完备的供博士后研究人员开展科学研究的基础条件。


培养目标150字以内

掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。

在传统能源高效利用、新能源技术、污染物控制和电气工程等方面,掌握系统、深入的专业知识,现代化的技术手段和解决工程问题的先进方法。具备工程项目研究、设计、施工、管理等方面的领军能力,具备在推动能源动力领域产业发展和工程技术进步方面做出创新性成果的能力。

至少熟练掌握一门外语,具备国际交流能力和国际竞争力。


研究方向


1)流体流动与传热传质;(2)燃烧与污染控制技术;(3)热工测量与自动化控制;(4)制冷与空调技术;(5)新能源利用技术;(6)现代电机驱动与伺服控制;(7)电机电器设计与多物理场分析;(8)电力系统规划、运行与控制;(9)电力电子装置与控制系统。


培养年限


工程博士培养学制为4年,最长可延至6年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。



学位论文



文献阅读

在论文选题及研究方向范围内至少阅读文献200篇,其中外文文献100篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

按照《东南大学博士研究生申请专业学位博士考核标准》执行。


预答辩报告

在学位论文工作基本完成以后,博士生应当进行论文工作总结报告,邀请五名以上同行专家对论文工作的主要成果和创新性等进行评议,同行专家应当为本学科或相关学科博士生指导教师或具有正高级专业技术职务的专家,其中半数以上应当具有博士生指导资格。

预答辩报告通过后方可申请答辩,进行学位论文送审。


附表:

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2





国际学术交流英语


32

2




公共

选修课


现代管理原理与方法


32

2



必选


学术道德


16

1



必选


工程伦理


16

1




类别

必修课

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选2

B003131

制冷空调专题

秋季

48

3

讲课+讨论

笔试

B003136

热工测量与控制专题

春季

48

3

面授讲课

笔试

B003138

热工过程建模与仿真专题

春季

48

3

面授讲课

笔试

B003140

燃烧专题

春季

48

3

面授讲课

笔试

B003132

大气环境专题

秋季

48

3

讲课+讨论

笔试

B003137

水环境专题

秋季

48

3

面授讲课

笔试

B016101

工程电磁场数值分析方法及其应用

春季

48

3

讲课+讨论

笔试


B016103

电机调速与控制

春季

48

3

讲课+讨论

笔试


B016106

同步电机理论与仿真

春季

32

2

讲课+讨论

笔试


B016114

电气设备电磁兼容技术

春季

32

2

讲课+讨论

笔试


B016121

电力电子系统建模、控制与仿真

春季

32

2

讲课+讨论

笔试


B016124

大电网技术

春季

32

2

讲课+讨论

笔试


类别

选修课

B003105

工程热物理专题

秋季

32

2

讲课+讨论

笔试

至少选1

B003118

多变量控制系统

春季

32

2

讲课+讨论

笔试

B003133

制冷新技术

春季

32

2

讲课+讨论

笔试

B003135

生物质热化学转化制备燃料与化学品

秋季

32

2

讲课+讨论

笔试

B003139

人工环境建模与仿真

春季

32

2

讲课+讨论

笔试


从“研究生课程目录”中选择








综合素养环节

专业实践

全日制工程博士在读期间累计不少于1年的专业实践,非全日制工程博士每年须向导师组提交实践报告。

6


考查


选听人文与科学素养系列讲座

至少3次,其中必须选听学风建设、法律、心理健康讲座至少各1次。

1


考查


学术活动与学术会议

应积极参加本领域学术活动至少4次,并做学术报告2次(其中至少使用外文1次)。全日制工程博士须参加境外学术交流至少1次。参加学术活动应有书面材料并交导师签字认可,在申请答辩前将经导师签字的书面材料交所在院系研究生秘书。

2


考查



:1. 博士生课程总学分至少13学分,其中必修课至少8学分;

2. 一般应在入学后一年内完成所有课程学分;

3.必修课和公共选修课根据此表,选修课程从研究生课程目录中选择。














Energy and Power (Doctor of Engineering)


(Discipline Code: 0858)


Brief Introductionto Discipline

This discipline includes four major fields of science: (1) Power Engineering and Engineering Thermophysics, (2) Heating, Gas Supply, Ventilation and Air Conditioning Engineering, (3) Environmental Science and Engineering, and (4) Electrical Engineering as well as their application extensions on engineering technology.


This discipline has strong merits in construction, including preponderant disciplines in Jiangsu Province and key construction disciplines of “985 Project”, “211 Project” and “Double-First Class” in Southeast University, and Thermal Engineering is a national key discipline, Electrical Engineering is the key disciplines of Jiangsu Province, China. This discipline also owns a series of high-level scientific research and engineering technology bases, including the National Engineering Research Center for Thermal Power Unit Vibration, the Key Laboratory of Energy Thermal Conversion and Process Measurement and Control, Engineering Research Center for Motion Control of Ministry of Education, the Research Center of Pollution Control and Resource Engineering of Jiangsu Province, the Key Laboratory of Solar Energy Technology of Jiangsu Province, and the Jiangsu Provincial Key Laboratory of Smart Grid Technology & EquipmentJiangsu Provincial lab center of power engineering. And the School of Public Health has jointly established the “Key Laboratory of Environmental Medicine Engineering, Southeast University”, which has a complete set of basic conditions for postdoctoral researchers to carry out scientific research.


Objectives


Students will grasp the fundamental principles of Marxism, stick to the Four Cardinal Principles, have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of energy, power, environment, Electrical Engineering, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for engineering practice, scientific research, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) Fluid flow and heat transfer mass transfer;

(2) Combustion and pollution control technology;

(3) Thermal measurement and automation control;

(4) Refrigeration and air conditioning technology;

(5) New energy utilization technology;

(6) Modern motor drive and servo control

(7) Electrical design and multi physics analysis 

(8) Power system planning, operation and control

(9) The power electronic device and control system


Duration

4 years, and no more than 6 years.



Credit Requirements and Curricula



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.



Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Studentsare required to read at least 200 literatures (including 100 literatures written in foreign languages) related to their dissertation and research direction,and writea review


DissertationWriting

In addition to compliance with the provisions of SEU, doctoral dissertation must be written in a systematic and completemanner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation

Assessment standard of doctoral degree for doctoral candidates in Southeast University.


Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2





Academic English for Doctoral  Students


32

2




Public Elective Courses


Modern Management: Principles and Methods


32

2



compulsory


Academic Ethics


16

1



compulsory


Engineering Ethics


16

1




Specialized Compulsory Courses

B003134

Subject Frontier

Autumn

48

3

Lecture and Discussion

Exam

At least one course

B003131

Refrigeration

and Air

Conditioning

Autumn

48

3

Lecture and Discussion

Exam

B003136

Thermal Measurement and Control Topics

Spring

48

3

Lecture  

Exam

B003138

Thermal Process Modeling and Simulation

Spring

48

3

Lecture

Exam

B003140

Combustion Topic

Spring

48

3

Lecture

Exam

B003132

Atmospheric Environment

Autumn

48

3

Lecture and Discussion

Exam

B003137

Water Environment

Autumn

48

3

Lecture

Exam

B016101

Numerial Analysis Mathod and Its Application of Enegineering Electromagnetical Field

Autumn

48

3

Lecture and Discussion

Exam

B016103

Adjustable Speed and Control of Electrical Machines

Spring

48

3

Lecture and Discussion

Exam

B016106

Theory of Synchronous Machine and its Simulation

Spring

32

2

Lecture and Discussion

Exam

B016114

The  Technology  of  EMC  in   Electrical  Equipment

Spring

32

2

Lecture and Discussion

Exam

B016121

Modeling, Control and Simulation of Power Electronic System

Spring

32

2

Lecture and Discussion

Exam

B016124

Technology  of  a  large  scale  power  system

Spring

32

2

Lecture and Discussion

Exam

Specialized Elective Courses

B003105

Engineering Thermophysics

Autumn

32

2

Lecture and Discussion

Exam

At least one course

B003118

Multivariable Control System

Spring

32

2

Lecture and Discussion

Exam

B003133

New Refrigeration Technology

Spring

32

2

Lecture and Discussion

Exam

B003135

Biomass Thermochemical Conversion to Produce Fuels and Chemicals

Autumn

32

2

Lecture and Discussion

Exam

B003139

Artificial Environment Modeling and Simulation

Spring

32

2

Lecture and Discussion

Exam

Integrated Quality Training

Professional Practice

Full-time student are required to participate Professional Practice at least one year. Part-time students are required to submit Practice Report to supervisor group each year.

6


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 3 lectures, including compulsory lectures on academic atmosphere construction, law and psychological health.

1


Non-exam


Academic Activity Participation

 Students are required to participate in at least 4 academic activities related to their disciplines and present academic reports at least twice (1 report must be presented in foreign language).  

Full time students are required to participate in overseas academic activities. The paper records of the academic activity participation should be signed for approval by supervisors of the students. Before applying for oral defense of dissertation, students are required to submit the paper records with the signatures of their supervisors to related staff in school/department.

2


Non-exam


Note:  

 1. After registration, the students are required to obtain 13 credits, including 8 credits forcompulsory courses.

 2. All compulsory courses are normally required to be completed within one year after registration.

 3. Compulsory courses and public elective courses are subject to this course plan;specialized elective courses can be chosen from “Graduate Courses Catalog”.





11


直博生培养方案Direct Doctoral (from Bachelor to PhD) Academic Program

动力工程及工程热物理


(学科代码:0807



科简介

学科由中国锅炉学创始人范从振、汽轮机学创始人王守泰、热工学创始人夏彦儒和热工控制学创始人钱钟韩在国立中央大学(本校前身)创建,是中国动力工程及工程热物理学科的发源地之一,至今已培养出包括7名中国科学院/工程院院士在内的近万名热能动力类高级专门人才。本学科是江苏省优势学科和东南大学“985工程”、“211工程”、“双一流”重点建设学科,内含热能工程、工程热物理、动力机械及工程、制冷与低温工程、流体机械及工程等二级学科,其中热能工程为国家重点学科、制冷与低温工程为江苏省重点学科。拥有火电机组振动国家工程研究中心、能源热转换及其过程测控教育部重点实验室、江苏省污染治理与资源化工程技术研究中心江苏省太阳能技术重点实验室等科研基地。


培养目标


掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在动力工程和工程热物理等方面,具有坚实的理论基础、系统的专门知识和良好的创新精神,胜任攻关复杂基础问题,进行基础理论创新和先进技术研发的工作。具备在能源动力领域开展先进科学研究、解决重大技术问题和培养高水平人才的领军能力。至少熟练掌握一门外语,具备国际交流能力和国际竞争力。


研究方向


1)流体流动与传热传质;(2)燃烧与污染控制技术;(3)热工测量与自动化控制;(4)热力系统仿真、优化与诊断;(5)动力机械振动分析及应用;(6)制冷与空调技术;(7)新能源技术


培养年限


直博生培养学制为5年,最长可延至7年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。



学位论文

文献阅读

在论文选题及研究方向范围内至少阅读文献200篇,其中外文文献100篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于3年。

本学科申请博士学位前应发表学术成果要求按照学校相关规定执行。



预答辩报告

在学位论文工作基本完成以后,博士生应当进行论文工作总结报告,邀请五名以上同行专家对论文工作的主要成果和创新性等进行评议,同行专家应当为本学科或相关学科博士生指导教师或具有正高级专业技术职务的专家,其中半数以上应当具有博士生指导资格。

预答辩报告通过后方可申请答辩,进行学位论文送审。



附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况

中国概况


博士英语


32

2



留学生选汉语

汉语

32

2



公共选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1





工程伦理


16

1




专业

必修课



S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

20

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

48

3

面授讲课

笔试

至少选1

S000112

数值分析

秋季

48

3

面授讲课

笔试

S000114

数理统计

秋季

32

2

面授讲课

笔试

S003103

高等工程热力学

秋季

32

2

面授讲课

笔试

至少选2门,其中全英文课程至少1门(不得与汉语课程重复)

S003106

高等流体力学

秋季

48

3

面授讲课

笔试

S003107

高等传热学

秋季

48

3

面授讲课

笔试

S003112

高等工程热力学(全英文)

秋季

32

2

全英文

笔试

S003114

高等流体力学(全英文)

秋季

48

3

全英文

笔试

S003115

高等传热学(全英文)

秋季

48

3

全英文

笔试

S003104

燃烧理论和技术

秋季

32

2

面授讲课

笔试

至少选1

S003105

热工控制理论与技术

秋季

32

2

面授讲课

笔试

S003204

动力机械运行特性及诊断

春季

32

2

面授讲课

笔试

S003205

热能系统动态特性

春季

32

2

面授讲课

笔试

S003231

多相流动力学

春季

32

2

面授讲课

笔试

S003401

低温与制冷原理

秋季

32

2

面授讲课

笔试

S003410

室内热湿环境营造过程的热学原理

秋季

32

2

面授讲课

笔试

S003508

热工测量理论及应用

春季

32

2

讲课+讨论

笔试

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003131

制冷空调专题

秋季

48

3

讲课+讨论

笔试

B003136

热工测量与控制专题

春季

48

3

面授讲课

笔试

B003138

热工过程建模与仿真专题

春季

48

3

面授讲课

笔试

B003140

燃烧专题

春季

48

3

面授讲课

笔试

专业

选修课

S003113

燃烧理论和技术(全英文)

秋季

32

2

全英文

笔试

硕士课程至少选择选择3门,博士课程至少选择2门,其中至少跨一级学科选修课程1

S003229

热力发电过程的仿真与控制(全英文)

春季

32

2

全英文

笔试

S003232

室内空气品质技术(全英文)

秋季

32

2

全英文

笔试

S003331

能源与环境管理(全英文)

春季

32

2

全英文

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

32

2

讲课+讨论

笔试

S003408

集散控制与现场总线控制技术(全英文)

春季

32

2

全英文

笔试

S003411

介质传热分子动力学(全英文)

春季

32

2

面授讲课

笔试

S003412

制冷系统的模拟与控制(全英文)

春季

32

2

其它

笔试

B003105

工程热物理专题

秋季

32

2

讲课+讨论

笔试

B003118

多变量控制系统

春季

32

2

讲课+讨论

笔试

B003133

制冷新技术

春季

32

2

讲课+讨论

笔试

B003135

生物质热化学转化制备燃料与化学品

秋季

32

2

讲课+讨论

笔试


其他新开课程






综合素养环节

环节

社会实践

竞赛、出国短访、生产实践(临床实践)或社会调查等

3


考查


教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

须参加境外学术交流活动。

2


考查



:1. 直博生在校期间课程总学分最低要求为:30学分。其中硕士专业必修课至少8学分,博士专业必修课至少4学分。此外,还应完成综合素养环节9学分。

2直博生全部学位课程学分一般应在入学后的两年内完成。

3必修课程根据此表,选修课程从研究生课程目录中选择。






DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:0807)



Brief Introductionto Discipline


 The discipline was founded by Fan Congzhen, founder of Chinese boiler science, Wang Shoutai, founder of steam turbines, Xia Yanru, founder of thermal engineering, and Qian Zhonghan, founder of thermal control science, at the National Central University (predecessor of the University), which is one of the birthplaces of Chinas Power Engineering and Engineering Thermophysics disciplines. Up to now, nearly 10,000 senior engineers in thermal power including 7 academicians of the Chinese Academy of Sciences/Engineering have been trained. This discipline is a dominant discipline in Jiangsu Province, the “985 Project”, “211 Project” and “Double First-class”key construction disciplines of Southeast University, including several second-class disciplines like thermal engineering, engineering thermophysics, power machinery and engineering, refrigeration and cryogenic engineering, fluid machinery and engineering, in which thermal engineering is a national key discipline, refrigeration and cryogenic engineering is a key discipline in Jiangsu Province. It has scientific research bases such as National Engineering Research Center of Turbogenerator Vibration, Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Jiangsu Engineering Research Center for pollution treatment and resource utilization, and the Key Laboratory of Solar Energy Technology of Jiangsu Province.



Objectives


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of energy and power, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) fluid flow and heat and mass transfer; (2) combustion and pollution control technology; (3) thermal measurement and automation control; (4) thermal system simulation, optimization and diagnosis; (5) dynamic mechanical vibration analysis and application; (6) refrigeration and air conditioning technology; (7) new energy technology.


Duration

5 years usually, and no more than 7 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.


Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Studentsare required to read at least 200 literatures (including 100 literatures written in foreign languages) related to their dissertation and research direction,and writea review.


DissertationWriting

In addition to compliance with the provisions of SEU, doctoral dissertation must be written in a systematic and completemanner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation

 Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least 3 years research related to the dissertation.

Assessment standard of doctoral degree for doctoral candidates in Southeast University.




Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2



international students only

Introduction to China

32

2




Academic English for Doctoral  Students


32

2



international students only

Chinese Language

32

2



Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship


16

1





Leadership


16

1





Engineering Ethics


16

1




Specialized Compulsory Courses

S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

48

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

48

3

Lecture

written exam

S000114

Mathematical statistics

Autumn

32

2

Lecture

written exam

S003103

Advanced engineering thermodynamics

Autumn

32

2

Lecture

written exam

at least 2 courses, including at least 1 full English course (cannot be repeated with Chinese courses)

S003106

Advanced fluid dynamics

Autumn

48

3

Lecture

written exam

S003107

Advanced heat transfer

Autumn

48

3

Lecture

written exam

S003112

Advanced engineering thermodynamics (full English)

Autumn

32

2

Full English

written exam

S003114

Advanced fluid dynamics (full English)

Autumn

48

3

Full English

written exam

S003115

Advanced heat transfer (full English)

Autumn

48

3

Full English

written exam

S003104

Combustion theory and technology

Autumn

32

2

Lecture

written exam

at least 1 course

S003105

Thermal Control Theory and Technology

Autumn

32

2

Lecture

written exam

S003204

Power machine operating characteristics and diagnosis

Spring

32

2

Lecture

written exam

S003205

Thermal system dynamics

Spring

32

2

Lecture

written exam

S003231

Multiphase flow dynamics

Spring

32

2

Lecture

written exam

S003401

Principle of low temperature and refrigeration

Autumn

32

2

Lecture

written exam

S003410

The thermal principle of the indoor heat and humidity environment construction process

Autumn

32

2

Lecture

written exam

S003508

Thermal measurement theory and application

Spring

32

2

Lecture + discussion

written exam

B003134

Frontier of the discipline

Autumn

48

3

Lecture + discussion

written exam

at least 1 course

B003131

Refrigeration and air conditioning

Autumn

48

3

Lecture + discussion

written exam

B003136

Thermal measurement and control

Spring

48

3

Lecture

written exam

B003138

Thermal Process Modeling and Simulation

Spring

48

3

Lecture

written exam

B003140

Combustion

Spring

48

3

Lecture

written exam

Specialized Elective Courses

S003113

Combustion theory and technology (full English)

Autumn

32

2

Full English

written exam

At least 3 compulsory courses for Master's Degree;

At least 2  compulsory courses for Doctor's Degree; including at least 1 interdisciplinary course


S003229

Simulation and control of thermal power generation process (full English)

Spring

32

2

Full English

written exam

S003232

Indoor air quality technology (full English)

Autumn

32

2

Full English

written exam

S003331

Energy and Environmental Management ( Full English)

Spring

32

2

Full English

written exam

S003338

Coal-fired air pollutant control technology (full English)

Spring

32

2

Lecture + discussion

written exam

S003408

Distributed Control and Fieldbus Control Technology (Full English)

Spring

32

2

Full English

written exam

S003411

Medium heat transfer molecular dynamics (Full English)

Spring

32

2

Lecture

written exam

S003412

Simulation and control of refrigeration systems (Full English)

Spring

32

2

Full English

written exam

B003105

Engineering Thermophysics

Autumn

32

2

Lecture + discussion

written exam

B003118

Multivariable control system

Spring

32

2

Lecture + discussion

written exam

B003133

New refrigeration technology

Spring

32

2

Lecture + discussion

written exam

B003135

Biomass thermochemical conversion to produce fuels and chemicals

Autumn

32

2

Lecture + discussion  

written exam

Integrated Quality Training

Social practice

 Contests, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.

2


Non-exam


Note:  

 1. The minimum creditsfor direct doctoral students: 30 credits, including 8 credits from specialized compulsory courses for Master's Degree and 4 credits from specialized compulsory courses for Doctor's Degree. In addition, students should obtain 9 credits from Integrated Quality Training.

 2. All degree courses are normally required to be completed within two years after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.








13


直博生培养方案Direct Doctoral (from Bachelor to PhD) Academic Program

供热、供燃气、通风及空调工程


(学科代码:081404


科简介300字以内


供热、供燃气、通风与空气调节工程是一门技术性和实用性很强的工程学科。随着建筑节能、智能化楼宇、生态建筑和建筑环境等技术的发展,该学科在我国应用前景与发展潜力十分巨大。我校从上世纪90年代初期开始,先后在新型制冷空调技术、楼宇自动化、建筑节能与建筑环境等领域开展了有关的研究。10多年来,承担了一批国家支撑项目、863973、重点研发、国家自然科学基金和省部级重点科研项目,取得了一系列在国内处于领先水平的研究成果,有的已达到国际先进水平,并在国内外产生了一定影响。多年来该学科与美国、英国、意大利、日本、新西兰、新加坡和香港等国家和地区的高等学校与研究所建立了长期的合作关系。


培养目标150字以内,以下内容仅供参考

掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在供热、供燃气、通风与空气调节工程等方面,具有坚实、宽广的理论基础和系统深入的专门知识。具有独立开展科学研究和解决有关技术问题的能力。能胜任科学研究、教学等方面的工作。至少熟练掌握一门外语。



研究方向


1)空调与制冷设备新技术,(2)可再生能源利用与建筑节能,(3)楼宇智能化,(4HVAC系统先进技术,(5)室内空气品质分析与控制


培养年限


学制5年,最长可延至7年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。



学位论文

文献阅读

在论文选题及研究方向范围内至少阅读文献100篇,其中外文文献50篇,完成一篇综述。

论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于2年。申请博士学位前至少必须满足如下条件之一:1、在 SCIE/SSCI源刊上发表学术论文二篇,其中在 JCR 分区表 中指定相应学科领域 Q1Q2 区期刊学术论文至少一篇;2、在 SCIE/SSCI源刊或 EI/CSCD(核心版)源刊上发表学术论文三篇,其中被 SCIE/SSCI收录学术论文至少二篇;3、在 SCIE/SSCI源刊上发表被 SCIE/SSCI收录学术论文二篇,且获授权国家发明专利一件。


附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况

中国概况






博士英语


32

2



留学生选汉语

汉语

32

2



公共选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1





工程伦理


16

1




专业

必修课



S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

16

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

48

3

面授讲课

笔试

至少选1

S000112

数值分析

秋季

48

3

面授讲课

笔试

S000114

数理统计

秋季

32

2

面授讲课

笔试

S003103

高等工程热力学

秋季

32

2

面授讲课

笔试

至少选2门,其中全英文课程至少1门(不得与汉语课程重复)

S003106

高等流体力学

秋季

48

3

面授讲课

笔试

S003107

高等传热学

秋季

48

3

面授讲课

笔试

S003112

高等工程热力学(全英文)

秋季

32

2

全英文

笔试

S003114

高等流体力学(全英文)

秋季

48

3

全英文

笔试

S003115

高等传热学(全英文)

秋季

48

3

全英文

笔试

S003104

燃烧理论和技术

秋季

32

2

面授讲课

笔试

至少选1

S003105

热工控制理论与技术

秋季

32

2

面授讲课

笔试

S003204

动力机械运行特性及诊断

春季

32

2

面授讲课

笔试

S003205

热能系统动态特性

春季

32

2

面授讲课

笔试

S003231

多相流动力学

春季

32

2

面授讲课

笔试

S003401

低温与制冷原理

秋季

32

2

面授讲课

笔试

S003410

室内热湿环境营造过程的热学原理

秋季

32

2

面授讲课

笔试

S003508

热工测量理论及应用

春季

32

2

讲课+讨论

笔试

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003131

制冷空调专题

秋季

48

3

讲课+讨论

笔试

B003132

热工测量与控制专题

春季

48

3

面授讲课

笔试

B003138

热工过程建模与仿真专题

春季

48

3

面授讲课

笔试

B003140

燃烧专题

春季

48

3

面授讲课

笔试

专业

选修课

S003113

燃烧理论和技术(全英文)

秋季

32

2

全英文

笔试

硕士课程至少选择选择3门,博士课程至少选择2门,其中至少跨一级学科选修课程1

S003229

热力发电过程的仿真与控制(全英文)

春季

32

2

全英文

笔试

S003232

室内空气品质技术(全英文)

秋季

32

2

全英文

笔试

S003331

能源与环境管理(全英文)

春季

32

2

全英文

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

32

2

讲课+讨论

笔试

S003408

集散控制与现场总线控制技术(全英文)

春季

32

2

全英文

笔试

S003411

介质传热分子动力学(全英文)

春季

32

2

面授讲课

笔试

S003412

制冷系统的模拟与控制(全英文)

春季

32

2

其它

笔试

B003105

工程热物理专题

秋季

32

2

讲课+讨论

笔试

B003118

多变量控制系统

春季

32

2

讲课+讨论

笔试

B003133

制冷新技术

春季

32

2

讲课+讨论

笔试

B003135

生物质热化学转化制备燃料与化学品

秋季

32

2

讲课+讨论

笔试


其他新开课程






综合素养环节

环节

社会实践

竞赛、出国短访、生产实践(临床实践)或社会调查等

3


考查


教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

理、工、医、经管须参加境外学术交流活动;其它学科须参加全国性学术交流活动,鼓励参加境外学术交流活动。

2


考查



:1. 直博生在校期间课程总学分最低要求为:理工类30学分,医学类35学分。其中硕士专业必修课至少8学分,博士专业必修课至少4学分。此外,还应完成综合素养环节9学分。

2直博生全部学位课程学分一般应在入学后的两年内完成。

3必修课程根据此表,选修课程从研究生课程目录中选择。










DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:080700)



Brief Introductionto Discipline (within 300 words)


Heating, ventilation and air conditioning is a technical and practical engineering discipline. With the development of technologies such as building energy conservation, intelligent buildings, ecological buildings and building environment, the application and development of HVAC show great potential in China. Since the early 1990s, our school has carried out related research in the fields of new refrigeration and air-conditioning technology, building automation, building energy conservation and building environment. Over the past 10 years, a number of projects, such as national support projects, 863 program, 973 program, key research and development projects, the National Natural Science Foundation and provincial and ministerial-level key scientific research projects, have been launched and a series of research results at leading level in China have been achieved, some of which are international advanced and has a certain impact at home and abroad. Over the years, long-term cooperative relationships with universities and research institutes in the United States, Britain, Italy, Japan, New Zealand, Singapore and Hong Kong have been established on the discipline.



Objectives (about 150 words;the followingis for reference only)


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of energy and power, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

  1.  New technology for air conditioning and refrigeration equipment;

  2.  Renewable energy utilization and building energy conservation;

  3.  Intelligent building;

  4.  Advanced technology of HVAC system;

  5.  Indoor air quality analysis and control.


Duration

5 years usually, and no more than 7 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

in accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.


Interim Assessment

in accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

including requirements on literature reading, thesis writing, publication, etc.


Literature Reading (for reference only)

Students are required to read at least 100 literatures (including 50 literatures written in foreign languages) related to their dissertation and research direction, and write a review.


DissertationWriting(for reference only)

In addition to compliance with the provisions of University, doctoral dissertation must be written in a systematic and complete manner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation(for reference only)

Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least two years research related to the dissertation. At least one of the following conditions must be met before being eligible for applying for a Doctor's Degree: 1. Publish two academic papers in the SCIE/SSCI source journals, including at least one of the Q1 and Q2 journal academic papers in the corresponding subject area in the JCR partition table; 2. Publish three academic papers in SCIE/SSCI Source Journals or EI/CSCD (Core Edition) Source Journals, including at least two academic papers indexed by SCIE/SSCI; 3. Publish two academic papers in SCIE/SSCI Source Journals and one authorized national invention patent.




Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2



international students only

Introduction to China

32

2




Academic English for Doctoral  Students


32

2



international students only

Chinese Language

32

2



Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship


16

1





Leadership


16

1





Engineering Ethics


16

1




Specialized Compulsory Courses

S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

48

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

48

3

Lecture

written exam

S000114

Mathematical statistics

Autumn

32

2

Lecture

written exam

S003103

Advanced engineering thermodynamics

Autumn

32

2

Lecture

written exam

at least 2 courses, including at least 1 full English course (cannot be repeated with Chinese courses)

S003106

Advanced fluid dynamics

Autumn

48

3

Lecture

written exam

S003107

Advanced heat transfer

Autumn

48

3

Lecture

written exam

S003112

Advanced engineering thermodynamics (full English)

Autumn

32

2

Full English

written exam

S003114

Advanced fluid dynamics (full English)

Autumn

48

3

Full English

written exam

S003115

Advanced heat transfer (full English)

Autumn

48

3

Full English

written exam

S003104

Combustion theory and technology

Autumn

32

2

Lecture

written exam

at least 1 course

S003105

Thermal Control Theory and Technology

Autumn

32

2

Lecture

written exam

S003204

Power machine operating characteristics and diagnosis

Spring

32

2

Lecture

written exam

S003205

Thermal system dynamics

Spring

32

2

Lecture

written exam

S003231

Multiphase flow dynamics

Spring

32

2

Lecture

written exam

S003401

Principle of low temperature and refrigeration

Autumn

32

2

Lecture

written exam

S003410

The thermal principle of the indoor heat and humidity environment construction process

Autumn

32

2

Lecture

written exam

S003508

Thermal measurement theory and application

Spring

32

2

Lecture + discussion

written exam

B003134

Frontier of the discipline

Autumn

48

3

Lecture + discussion

written exam

at least 1 course

B003131

Refrigeration and air conditioning

Autumn

48

3

Lecture + discussion

written exam

B003132

Thermal measurement and control

Spring

48

3

Lecture

written exam

B003138

Thermal Process Modeling and Simulation

Spring

48

3

Lecture

written exam

B003140

Combustion

Spring

48

3

Lecture

written exam

Specialized Elective Courses

S003113

Combustion theory and technology (full English)

Autumn

32

2

Full English

written exam

At least 3 compulsory courses for Master's Degree;

At least 2  compulsory courses for Doctor's Degree; including at least 1 interdisciplinary course


S003229

Simulation and control of thermal power generation process (full English)

Spring

32

2

Full English

written exam

S003232

Indoor air quality technology (full English)

Autumn

32

2

Full English

written exam

S003331

Energy and Environmental Management ( Full English)

Spring

32

2

Full English

written exam

S003338

Coal-fired air pollutant control technology (full English)

Spring

32

2

Lecture + discussion

written exam

S003408

Distributed Control and Fieldbus Control Technology (Full English)

Spring

32

2

Full English

written exam

S003411

Medium heat transfer molecular dynamics (Full English)

Spring

32

2

Lecture

written exam

S003412

Simulation and control of refrigeration systems (Full English)

Spring

32

2

Full English

written exam

B003105

Engineering Thermophysics

Autumn

32

2

Lecture + discussion

written exam

B003118

Multivariable control system

Spring

32

2

Lecture + discussion

written exam

B003133

New refrigeration technology

Spring

32

2

Lecture + discussion

written exam

B003135

Biomass thermochemical conversion to produce fuels and chemicals

Autumn

32

2

Lecture + discussion  

written exam

Integrated Quality Training

Social practice

 Contests, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.

2


Non-exam


Note:  

 1. The minimum creditsfor direct doctoral students: 30 credits for students of science and engineering, 35 credits for students of medical science, including 8 credits from specialized compulsory courses for Master's Degree and 4 credits from specialized compulsory courses for Doctor's Degree. In addition, students should obtain 9 credits from Integrated Quality Training.

 2. All degree courses are normally required to be completed within two years after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.






直博生培养方案Direct Doctoral (from Bachelor to PhD) Academic Program

环境科学与工程


(学科代码:0830


科简介300字以内


东南大学环境学科拥有悠久的发展历史,从上世纪40年代初期中央大学土木工程系设置的卫生工程学组算起,已有70多年的历史。恢复高考后,我校是教育部直属第一批5所全国最早创办环境工程专业的院校(1979年)。本学科具有环境学科博士、硕士、本科和继续教育的完整教学体系。学科拥有“985工程”经费资助建设的“环境科学与工程实验中心”、“江苏省污染控制及资源化工程技术研究中心”,以及与环境学科相关的“能源热转化及其过程测控教育部重点实验室”,并与公共卫生学院共建“东南大学环境医学工程教育部重点实验室”,具有完备的供博士后研究人员开展科学研究的基础条件。



培养目标150字以内


掌握马克思主义基本原理,坚持四项基本原则,热爱祖国,遵纪守法,品行端正,具有为人民服务和为社会主义建设事业献身的精神。在环境科学与工程等方面,具有坚实的理论基础、系统的专门知识和良好的创新精神,胜任攻关复杂基础问题,进行基础理论创新和先进技术研发的工作。具备在环境保护与污染防治领域开展先进科学研究、解决重大技术问题和培养高水平人才的领军能力。至少熟练掌握一门外语,具备国际交流能力和国际竞争力。


研究方向


1)水污染控制与水深度处理;(2)大气污染控制和废气净化;(3)固体废弃物处理处置与资源化;(4)湖泊富营养化控制和生态修复;(5)饮用水安全保障理论与技术;(6)燃煤大气污染防治


培养年限


直博生培养学制为5年,最长可延至7年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学博士研究生中期考核与筛选办法》执行。


学位论文

文献阅读

在论文选题及研究方向范围内至少阅读文献200篇,其中外文文献100篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平博士论文应有一定的深度和广度,要求达到:具有明显的创新性,部分研究内容应达到国际先进水平,并具有一定涵盖面。学位论文的研究结果应有新发现、新见解,对本学科的学术发展具有一定的指导意义。围绕论文开展科研工作的时间不少于3年。

本学科申请博士学位前应发表学术成果要求按照学校相关规定执行。



预答辩报告

在学位论文工作基本完成以后,博士生应当进行论文工作总结报告,邀请五名以上同行专家对论文工作的主要成果和创新性等进行评议,同行专家应当为本学科或相关学科博士生指导教师或具有正高级专业技术职务的专家,其中半数以上应当具有博士生指导资格。

预答辩报告通过后方可申请答辩,进行学位论文送审。


附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课


中国马克思主义与当代


32

2



留学生选中国概况

B000113

中国概况

32

2




博士英语


32

2



留学生选汉语

汉语

32

2



公共选修课


学术道德


16

1



必选


创新创业课程


16

1





领导力素养课程


16

1





工程伦理


16

1




专业

必修课



S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

20

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

48

3

面授讲课

笔试

至少选1

S000112

数值分析

秋季

48

3

面授讲课

笔试

S003104

燃烧理论和技术

秋季

32

2

面授讲课

笔试

至少选2

S003106

高等流体力学

秋季

48

3

面授讲课

笔试

S003308

环境流体力学

春季

32

2

面授讲课

笔试

S003334

生态毒理学

春季

32

2

面授讲课

笔试

S003302

固体废弃物处理技术

春季

32

2

面授讲课

笔试

至少选2

S003315

水的物化处理原理

春季

32

2

面授讲课

笔试

S003316

水的生物处理原理

春季

32

2

面授讲课

笔试

S003317

大气污染控制原理

春季

32

2

面授讲课

笔试

B003134

学科前沿专题

秋季

48

3

讲课+讨论

笔试

至少选1

B003132

大气环境专题

秋季

48

3

讲课+讨论

笔试

B003137

水环境专题

秋季

48

3

面授讲课

笔试

专业

选修课

S003330

大气污染控制原理与技术

秋季

32

2

面授讲课

笔试

硕士课程至少选择3门,博士课程至少选择2门,其中至少跨一级学科选修课程1

S003336

高等环境化学(全英文)

秋季

32

2

面授讲课

笔试

S003337

生物化学处理工艺与进展

春季

32

2

面授讲课

笔试

S003342

新兴污染物的环境风险与控制技术

秋季

32

2

面授讲课

笔试

S003343

环境仪器分析原理与实验

春季

16

1

面授讲课

笔试

S003344

材料表征分析方法

秋季

32

2

面授讲课

笔试

B003139

人工环境建模与仿真

春季

32

2

讲课+讨论

笔试


其他新开课程






综合素养环节

社会实践

竞赛、出国短访、生产实践(临床实践)或社会调查等

3


考查


教学实践

须担任助教。要求能独立带教实验课,辅导或批改作业。

3


考查


人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


学术交流活动

须参加境外学术交流活动。

2


考查



:1. 直博生在校期间课程总学分最低要求为30学分,其中硕士专业必修课至少8学分,博士专业必修课至少4学分。此外,还应完成综合素养环节9学分。

2直博生全部学位课程学分一般应在入学后的两年内完成。

3必修课程根据此表,选修课程从研究生课程目录中选择。










DisciplineEnvironmental Science and Engineering


(Discipline Code: 0830 )



Brief Introductionto Discipline


Southeast University Environmental Science has a long history of development. It has more than 70 years since the health engineering group set up by the Civil Engineering Department of the Central University in the early 1940s. After the resumption of the college entrance examination, our school is one of the first five institutions in the country to establish environmental engineering under the Ministry of Education (1979). The discipline has a complete teaching system for doctoral, master, undergraduate and continuing education. With foundation of the “985 Project”, the discipline has the “Environmental Science and Engineering Experiment Center”, the “Jiangsu Provincial Pollution Control and Resource Engineering Technology Research Center”, and the “Energy Thermal Transformation and Process Measurement and Control Department of the Ministry of Education” which is related to environmental disciplines. Meanwhile it has the “Key Laboratory of Environmental Medical Engineering of the Southeast University” which is established with the School of Public Health. The discipline has complete basic conditions for postdoctoral researchers to carry out scientific research.



Objectives


Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of environmental science and engineering. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for environmental science and technology innovation, environmental management, college teachers and other aspects of work.Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) Water pollution control and water treatment, (2) Air pollution control and exhaust gas purification, (3) Solid waste treatment and disposal, (4) Lake eutrophication control and ecological restoration, (5) Drinking water safety assurance theory and technology, (6) Prevention and control of coal-fired air pollution



Duration

5 years usually, and no more than 7 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis.


Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Doctoral Graduates.


Doctoral Dissertation

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Studentsare required to read at least 200 literatures (including 100 literatures written in foreign languages) related to their dissertation and research direction,and writea review.


DissertationWriting

In addition to compliance with the provisions of SEU, doctoral dissertation must be written in a systematic and completemanner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Dissertation Evaluation

 Doctoral dissertation should be written with a certain depth, breadth and distinctive creativeness. Some part of the research should reach the advanced world levels. The findings and conceptions presented in the dissertation should be new and have positive impact on academic development of this discipline. Students are required to conduct at least 3 years research related to the dissertation.

Assessment standard of doctoral degree for doctoral candidates in Southeast University.


Appendix

Course Type

Course Number

Courses

Terms

Class

Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Chinese Marxism and Contemporary Era


32

2



international students only

B000113

Introduction to China

32

2





Academic English for Doctoral  Students


32

2





Chinese Language

32

2



international students only

Public Elective Courses


Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship


16

1





Leadership


16

1





Engineering Ethics


16

1




Specialized Compulsory Courses

S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

48

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

48

3

Lecture

written exam

S003104

Combustion theory and technology

Autumn

32

2

Lecture

written exam

at least 2 courses

S003106

Advanced fluid dynamics

Autumn

48

3

Lecture

written exam

S003308

Environmental fluid dynamics

Spring

32

2

Lecture

written exam

S003334

Ecotoxicology

Spring

32

2

Lecture

written exam

S003302

Solid waste treatment technology

Spring

32

2

Lecture

written exam

at least 2 courses

S003315

Principle in water physicochemical treatment

Spring

32

2

Lecture

written exam

S003316

Principle in water biological treatment

Spring

32

2

Lecture

written exam

S003317

Air pollution control principle

Spring

32

2

Lecture

written exam

B003134

Frontier of the discipline

Autumn

48

3

Lecture + discussion

written exam

at least 1 course

B003132

Topic on atmospheric environment

Autumn

48

3

Lecture + discussion

written exam

B003137

Topic on water environment

Autumn

48

3

Lecture + discussion

written exam

Specialized Elective Courses

S003330

Air pollution control principles and technologies

Autumn

32

2

Lecture

written exam

At least 3 compulsory courses for Master's Degree;

At least 2  compulsory courses for Doctor's Degree; including at least 1 interdisciplinary course

S003336

Advanced Environmental Chemistry (full English)  

Autumn

32

2

Full English

written exam

S003337

Process and progress in biochemical treatment

Spring

32

2

Lecture

written exam

S003342

Environmental risk and control technology for emerging pollutants

Autumn

32

2

Lecture

written exam

S003343

Environmental instrument analysis principle and experiment

Spring

16

1

Lecture

written exam

S003344

Material characterization and analysis method

Autumn

32

2

Lecture

written exam

B003139

Artificial environment modeling and simulation

Spring



32

2

Lecture + discussion

written exam


Other new courses






Integrated Quality Training

Social practice

 Contests, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Teaching practice

Students are required to work as Teaching Assistants, being responsible for lab experiments, tutoring and correcting relevant works.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including compulsory lectures on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation

Students of science, engineering, medicine and economics and management are required to participate in overseas academic activities. Students of other disciplines are required to participate in national academic activities and are encouraged to take part in overseas academic activities.

2


Non-exam


Note:  

 1. The minimum creditsfor direct doctoral students: 30 credits, including 8 credits from specialized compulsory courses for Master's Degree and 4 credits from specialized compulsory courses for Doctor's Degree. In addition, students should obtain 9 credits from Integrated Quality Training.

 2. All degree courses are normally required to be completed within two years after registration.

 3. Compulsory courses are subject to this course plan; elective courses can be chosen from “Graduate Courses Catalog”.








 
东南大学硕士研究生培养方案

 

环境科学与工程


(学科代码:0830


科简介400字以内


东南大学环境学科拥有悠久的发展历史,从上世纪40年代初期中央大学土木工程系设置的卫生工程学组算起,已有70多年的历史。恢复高考后,我校是教育部直属第一批5所全国最早创办环境工程专业的院校(1979年)。本学科具有环境学科博士、硕士、本科和继续教育的完整教学体系。学科拥有“985工程”经费资助建设的“环境科学与工程实验中心”、“江苏省污染控制及资源化工程技术研究中心”,以及与环境学科相关的“能源热转化及其过程测控教育部重点实验室”,并与公共卫生学院共建“东南大学环境医学工程教育部重点实验室”,具有完备的供博士后研究人员开展科学研究的基础条件。



培养目标150字左右,以下内容仅供参考


掌握马列主义毛泽东思想和邓小平理论,热爱祖国,遵纪守法、学风严谨,实事求是,有良好的敬业精神和合作精神。掌握坚实的环境科学与工程领域的基础理论和系统的专门知识,具有从事科学研究工作或独立担负专门技术工作的能力,硕士学位获得者能胜任科研,科技开发及教学工作。熟练掌握一门外语。



研究方向


1)水污染控制与水深度处理,2)大气污染控制和废气净化, 3)固体废弃物处理处置与资源化,4)湖泊富营养化控制和生态修复, 5)饮用水安全保障理论与技术, 6)燃煤大气污染防治


培养年限


一般为2-3年,最长可延至4年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学硕士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

文献阅读在论文选题及研究方向范围内至少阅读文献30篇,其中外文文献20篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平学位论文应在调查研究的基础上,选择有一定学术价值,对国民经济发展有一定意义的课题。围绕论文开展科研工作的时间不少于1年。申请硕士学位前,至少必须满足如下条件之一①第1作者在SCI源刊、EI源刊、国际学术会议上发表1篇学术论文; ②第1作者在《东南大学能源与环境学院硕士研究生教育重要刊物目录》上发表1篇学术论文,并申请1项国家发明专利(获申请号,研究生本人排名第一,或导师排名第一研究生本人排名第二);③获得省部级科研成果奖1项(申请者有获奖证书)。



附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课

S000301 B000113

中国特色社会主义理论与实践研究

春秋季

32

2

面授讲课

笔试

留学生选中国概况

中国概况

32

2

面授讲课

笔试

S000151 S000156

硕士学位外语

春秋季

64

4

面授讲课

笔试

留学生选汉语

汉语

64

4

面授讲课

笔试

公共

选修课


S000302

自然辩证法概论


16

1

面授讲课

笔试

必选

一门


马克思主义与社会科学方法论


16

1




学术道德


16

1



必选


创新创业课程


16

1



必选


工程伦理


16

1





领导力素养课


16

1




专业

必修课

S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

20

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

54

3

面授讲课

笔试

1

S000112

数值分析

秋季

54

3

面授讲课

笔试

S003104

燃烧理论和技术

秋季

36

2

面授讲课

笔试

至少选2

S003106

高等流体力学

秋季

54

3

面授讲课

笔试

S003308

环境流体力学

春季

36

2

面授讲课

笔试

S003334

生态毒理学

春季

36

2

面授讲课

笔试

S003302

固体废弃物处理技术

春季

36

2

面授讲课

笔试

至少选2

S003315

水的物化处理原理

春季

36

2

面授讲课

笔试

S003316

水的生物处理原理

春季

36

2

面授讲课

笔试

S003317

大气污染控制原理

春季

36

2

面授讲课

笔试

专业

选修课

S003330

大气污染控制原理与技术

秋季

36

2

面授讲课

笔试

≥7学分,

需要包含跨一级学科课程至少1

S003336

高等环境化学(全英文)

秋季

36

2

面授讲课

笔试

S003337

生物化学处理工艺与进展

春季

36

2

面授讲课

笔试

S003342

新兴污染物的环境风险与控制技术

秋季

36

2

面授讲课

笔试

S003343

环境仪器分析原理与实验

春季

18

1

面授讲课

笔试

S003344

材料表征分析方法

秋季

36

2

面授讲课

笔试


其他新开课程






综合

素养

环节

创新创业实践

竞赛、教学实践、出国短访、生产实践(临床实践)或社会调查等。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


参加学术活动及学术论文撰写

参加学术研讨活动至少2次并撰写学术论文1篇。

1


考查



:1.在校期间课程总学分最低要求为:26学分,其中必修课程最低学分要求为: 16学分, 其余为选修课程。此外,还应完成综合素养环节5学分。

2必修课程学习一般应在入学后一学年内完成。

3必修课程和公共选修课根据此表,专业选修课从“研究生课程目录”中选择。












DisciplineEnvironmental Science and Engineering


(Discipline Code:0830)



Brief Introductionto Discipline (within 400 words)


Southeast University Environmental Science has a long history of development. It has more than 70 years since the health engineering group set up by the Civil Engineering Department of the Central University in the early 1940s. After the resumption of the college entrance examination, our school is one of the first five institutions in the country to establish environmental engineering under the Ministry of Education (1979). The discipline has a complete teaching system for doctoral, master, undergraduate and continuing education. With foundation of the “985 Project”, the discipline has the “Environmental Science and Engineering Experiment Center”, the “Jiangsu Provincial Pollution Control and Resource Engineering Technology Research Center”, and the “Energy Thermal Transformation and Process Measurement and Control Department of the Ministry of Education” which is related to environmental disciplines. Meanwhile it has the “Key Laboratory of Environmental Medical Engineering of the Southeast University” which is established with the School of Public Health. The discipline has complete basic conditions for postdoctoral researchers to carry out scientific research.



Objectives (about 150 words; the following is for reference only:

Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations, and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of environmentalscience and engineering, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, technology development, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) Water pollution control and water treatment, (2) Air pollution control and exhaust gas purification, (3) Solid waste treatment and disposal, (4) Lake eutrophication control and ecological restoration, (5) Drinking water safety assurance theory and technology, (6) Prevention and control of coal-fired air pollution


Duration

2-3 years usually, and no more than 4 years.


Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis


Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Master Graduates


Thesis

including requirements on literature reading, thesis writing, publication, etc.

Literature Reading (for reference only)

Students are required to read at least 30 literatures (including 20 literatures written in foreign languages) related to their thesis and research direction and write a review.


Thesis Writing(for reference only)

In addition to compliance with the provisions of University, thesis must be written in a systematic and complete manner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Thesis Evaluation(for reference only)

Thesis should be written based on students’ own study and research. The findings presented in the thesis should have higher academic value and positive impact on economic development of China. Students are required to conduct at least one year research. At least one of the following conditions must be met before being eligible for applying for a Master's Degree: 1. Publish 1 academic paper in the SCI Source Journal, EI Source Journal, or International Academic Conference as the first author; 2. Publish 1 academic paper in the Catalogue of Important Publications of the Graduate School of Energy and Environment of Southeast University as the first author, and apply for 1 national invention patent (obtained the application number, the graduate student himself ranked first, or the tutor ranked first and the graduate student ranked second); 3. Win 1 provincial and ministerial level scientific research achievement award (the applicant has the award certificate).


Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses

S000301

Theory and Practice of Socialism 

with Chinese Characteristics

Spring and autumn

32

2

Lecture

written exam


B000113

Introduction to China

32

2

Lecture

written exam

international students only









S000151

Academic English for Graduate Students

Spring and autumn

64

4

Lecture

written exam


S000156

Chinese Language

64

4

Lecture

written exam

international students only

Public Elective

Courses

S000302

An Introduction to Nature Dialectics  


16

1

Lecture

written exam

Choose either of the two


Marxism and Social Science Methodology 


16

1




Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1



compulsory


Engineering Ethics


16

1





Leadership


16

1




 Specialized Compulsory Courses


S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

54

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

54

3

Lecture

written exam

S003104

Combustion theory and technology

Autumn

36

2

Lecture

written exam

at least 2 courses

S003106

Advanced fluid dynamics

Autumn

54

3

Lecture

written exam

S003308

Environmental fluid dynamics

Spring

36

2

Lecture

written exam

S003334

Ecotoxicology

Spring

36

2

Lecture

written exam

S003302

Solid waste treatment technology

Spring

36

2

Lecture

written exam

at least 2 courses

S003315

Principle in water physicochemical treatment

Spring

36

2

Lecture

written exam

S003316

Principle in water biological treatment

Spring

36

2

Lecture

written exam

S003317

Air pollution control principle

Spring

36

2

Lecture

written exam

Specialized Elective Courses

S003330

Air pollution control principles and technologies

Autumn

36

2

Lecture

written exam

≥7 credits, including at least 1 interdisciplinary course (choose other professional courses)

S003336

 Advanced Environmental Chemistry (full English)  

Autumn

36

2

Full English

written exam

S003337

Process and progress in biochemical treatment

Spring

36

2

Lecture

written exam

S003342

Environmental risk and control technology for emerging pollutants

Autumn

36

2

Lecture

written exam

S003343

Environmental instrument analysis principle and experiment

Spring

18

1

Lecture

written exam

S003344

Material characterization and analysis method

Autumn

36

2

Lecture

written exam


Other new courses






Comprehensive literacy

Innovation and entrepreneurship practice

Contests, teaching practice, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Listening to the Humanities and Science Literacy Series Lecture

Students are required to attend at least 8 lectures, including compulsory lectures on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation and Academic Writing Practice

Students are required to participate in at least 2 academic activities and write 1 academic paper.

1


Non-exam  


Note:  

 (1) The minimum creditsfor master students: 26 credits for students of science and engineering, 28 credits for students of medical science, 30 credits for students of liberal arts, economics and management, with 16 credits from compulsory courses. In addition, students should obtain 5 credits from Integrated Quality Training.

 (2) All compulsory courses are normally required to be completed within one year after registration.

(3) Compulsory courses and public elective courses are subject to this course plan;specialized elective courses can be chosen from “Graduate Courses Catalog”.





供热、供燃气、通风及空调工程


(学科代码:081404


科简介400字以内


供热、供燃气、通风与空气调节工程是一门技术性和实用性很强的工程学科。随着建筑节能、智能化楼宇、生态建筑和建筑环境等技术的发展,该学科在我国应用前景与发展潜力十分巨大。我校从上世纪90年代初期开始,先后在新型制冷空调技术、楼宇自动化、建筑节能与建筑环境等领域开展了有关的研究。10多年来,承担了一批国家支撑项目、863973、重点研发、国家自然科学基金和省部级重点科研项目,取得了一系列在国内处于领先水平的研究成果,有的已达到国际先进水平,并在国内外产生了一定影响。多年来该学科与美国、英国、意大利、日本、新西兰、新加坡和香港等国家和地区的高等学校与研究所建立了长期的合作关系。



培养目标150字左右,以下内容仅供参考


掌握马列主义毛泽东思想和邓小平理论,热爱祖国,遵纪守法、学风严谨,实事求是,有良好的敬业精神和合作精神。掌握坚实的供热、供燃气、通风与空气调节工程领域的基础理论和系统的专门知识,具有从事科学研究工作或独立担负专门技术工作的能力,硕士学位获得者能胜任科研,科技开发及教学工作。熟练掌握一门外语。



研究方向


1)空调与制冷设备新技术,(2)可再生能源利用与建筑节能,(3)楼宇智能化,(4HVAC系统先进技术,(5)室内空气品质分析与控制


培养年限


一般为2-3年,最长可延至4年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学硕士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

文献阅读在论文选题及研究方向范围内至少阅读文献30篇,其中外文文献20篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平学位论文应在调查研究的基础上,选择有一定学术价值,对国民经济发展有一定意义的课题。围绕论文开展科研工作的时间不少于1年。申请硕士学位前,至少必须满足如下条件之一①第1作者在SCI源刊、EI源刊、国际学术会议上发表1篇学术论文; ②第1作者在《东南大学能源与环境学院硕士研究生教育重要刊物目录》上发表1篇学术论文,并申请1项国家发明专利(获申请号,研究生本人排名第一,或导师排名第一研究生本人排名第二);③获得省部级科研成果奖1项(申请者有获奖证书)。



附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课

S000301 B000113

中国特色社会主义理论与实践研究

春秋季

32

2

面授讲课

笔试

留学生选中国概况

中国概况

32

2

面授讲课

笔试

S000151 S000156

硕士学位外语

春秋季

64

4

面授讲课

笔试

留学生选汉语

汉语

64

4

面授讲课

笔试

公共

选修课


S000302

自然辩证法概论


16

1

面授讲课

笔试

必选

一门


马克思主义与社会科学方法论


16

1




学术道德


16

1



必选


创新创业课程


16

1



必选


工程伦理


16

1





领导力素养课


16

1




专业

必修课

S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

20

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

54

3

面授讲课

笔试

至少选1

S000112

数值分析

秋季

54

3

面授讲课

笔试

S000114

数理统计

秋季

36

2

面授讲课

笔试

S003103

高等工程热力学

秋季

36

2

面授讲课

笔试

至少选2门,其中全英文课程至少1门(不得与汉语课程重复)

S003106

高等流体力学

秋季

54

3

面授讲课

笔试

S003107

高等传热学

秋季

54

3

面授讲课

笔试

S003112

高等工程热力学(全英文)

秋季

36

2

全英文

笔试

S003114

高等流体力学(全英文)

秋季

54

3

全英文

笔试

S003115

高等传热学(全英文)

秋季

54

3

全英文

笔试

S003104

燃烧理论和技术

秋季

36

2

面授讲课

笔试

至少选2

S003105

热工控制理论与技术

秋季

36

2

面授讲课

笔试

S003204

动力机械运行特性及诊断

春季

36

2

面授讲课

笔试

S003205

热能系统动态特性

春季

36

2

面授讲课

笔试

S003231

多相流动力学

春季

36

2

面授讲课

笔试

S003401

低温与制冷原理

秋季

36

2

面授讲课

笔试

S003410

室内热湿环境营造过程的热学原理

秋季

36

2

面授讲课

笔试

S003508

热工测量理论及应用

春季

36

2

讲课+讨论

笔试

专业

选修课

S003113

燃烧理论和技术(全英文)

秋季

36

2

全英文

笔试

7学分,

需要包含跨领域课程至少1门(选择其他专业课程)

S003229

热力发电过程的仿真与控制(全英文)

春季

36

2

全英文

笔试

S003232

室内空气品质技术(全英文)

秋季

36

2

全英文

笔试

S003331

能源与环境管理(全英文)

春季

36

2

全英文

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

36

2

讲课+讨论

笔试

S003408

集散控制与现场总线控制技术(全英文)

春季

36

2

全英文

笔试

S003411

介质传热分子动力学(全英文)

春季

36

2

面授讲课

笔试

S003412

制冷系统的模拟与控制(全英文)

春季

36

2

其它

笔试


其他新开课程






综合

素养

环节

创新创业实践

竞赛、教学实践、出国短访、生产实践(临床实践)或社会调查等。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


参加学术活动及学术论文撰写

参加学术研讨活动至少2次并撰写学术论文1篇。

1


考查



:1.在校期间课程总学分最低要求为:26学分,其中必修课程最低学分要求为: 16学分, 其余为选修课程。此外,还应完成综合素养环节5学分。

2必修课程学习一般应在入学后一学年内完成。

3必修课程和公共选修课根据此表,专业选修课从“研究生课程目录”中选择。



DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:080700)



Brief Introductionto Discipline (within 400 words)


Heating, ventilation and air conditioning is a technical and practical engineering discipline. With the development of technologies such as building energy conservation, intelligent buildings, ecological buildings and building environment, the application and development of HVAC show great potential in China. Since the early 1990s, our school has carried out related research in the fields of new refrigeration and air-conditioning technology, building automation, building energy conservation and building environment. Over the past 10 years, a number of projects, such as national support projects, 863 program, 973 program, key research and development projects, the National Natural Science Foundation and provincial and ministerial-level key scientific research projects, have been launched and a series of research results at leading level in China have been achieved, some of which are international advanced and has a certain impact at home and abroad. Over the years, long-term cooperative relationships with universities and research institutes in the United States, Britain, Italy, Japan, New Zealand, Singapore and Hong Kong have been established on the discipline.



Objectives (about 150 words; the following is for reference only:

Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of power engineering and engineering thermophysics, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, technology development, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

  1.  New technology for air conditioning and refrigeration equipment;

  2.  Renewable energy utilization and building energy conservation;

  3.  Intelligent building;

  4.  Advanced technology of HVAC system;

  5.  Indoor air quality analysis and control.




Duration

2-3 years usually, and no more than 4 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

in accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis


Interim Assessment

in accordance with Measures of Southeast University on Medium-term Assessment and Screening for Master Graduates


Thesis

including requirements on literature reading, thesis writing, publication, etc.

Literature Reading (for reference only)

Students are required to read at least 30 literatures (including 20 literatures written in foreign languages) related to their thesis and research direction, and write a review.


Thesis Writing(for reference only)

In addition to compliance with the provisions of University, thesis must be written in a systematic and complete manner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Thesis Evaluation(for reference only)

Thesis should be written based on students’ own study and research. The findings presented in the thesis should have higher academic value and positive impact on economic development of China. Students are required to conduct at least one year research. At least one of the following conditions must be met before being eligible for applying for a Master's Degree: 1. Publish 1 academic paper in the SCI Source Journal, EI Source Journal, or International Academic Conference as the first author; 2. Publish 1 academic paper in the Catalogue of Important Publications of the Graduate School of Energy and Environment of Southeast University as the first author, and apply for 1 national invention patent (obtained the application number, the graduate student himself ranked first, or the tutor ranked first and the graduate student ranked second); 3. Win 1 provincial and ministerial level scientific research achievement award (the applicant has the award certificate).




Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Theory and Practice of Socialism 

with Chinese Characteristics


32

2



international students only


Introduction to China


32

2




Academic English for Graduate Students


64

4



international students only


Chinese Language


64

4



Public Elective

Courses


An Introduction to Nature Dialectics  


16

1



Choose either of the two


Marxism and Social Science Methodology 


16

1




Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1



compulsory


Engineering Ethics


16

1





Leadership


16

1




 Specialized Compulsory Courses


S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

54

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

54

3

Lecture

written exam

S000114

Mathematical statistics

Autumn

36

2

Lecture

written exam

S003103

Advanced engineering thermodynamics

Autumn

36

2

Lecture

written exam

at least 2 courses, including at least 1 full English course (cannot be repeated with Chinese courses)

S003106

Advanced fluid dynamics

Autumn

54

3

Lecture

written exam

S003107

Advanced heat transfer

Autumn

54

3

Lecture

written exam

S003112

Advanced engineering thermodynamics (full English)

Autumn

36

2

Full English

written exam

S003114

Advanced fluid dynamics (full English)

Autumn

54

3

Full English

written exam

S003115

Advanced heat transfer (full English)

Autumn

54

3

Full English

written exam

S003104

Combustion theory and technology

Autumn

36

2

Lecture

written exam

at least 2 courses

S003105

Thermal Control Theory and Technology

Autumn

36

2

Lecture

written exam

S003204

Power machine operating characteristics and diagnosis

Spring

36

2

Lecture

written exam

S003205

Thermal system dynamics

Spring

36

2

Lecture

written exam

S003231

Multiphase flow dynamics

Spring

36

2

Lecture

written exam

S003401

Principle of low temperature and refrigeration

Autumn

36

2

Lecture

written exam

S003410

The thermal principle of the indoor heat and humidity environment construction process

Autumn

36

2

Lecture

written exam

S003508

Thermal measurement theory and application

Spring

36

2

Lecture + discussion

written exam

Specialized Elective Courses

S003113

Combustion theory and technology (full English)

Autumn

36

2

Full English

written exam

≥7 credits, including at least 1 interdisciplinary course (choose other professional courses)

S003229

Simulation and control of thermal power generation process (full English)

Spring

36

2

Full English

written exam

S003232

Indoor air quality technology (full English)

Autumn

36

2

Full English

written exam

S003331

Energy and Environmental Management ( Full English)

Spring

36

2

Full English

written exam

S003338

Coal-fired air pollutant control technology (full English)

Spring

36

2

Lecture + discussion

written exam

S003408

Distributed Control and Fieldbus Control Technology (Full English)

Spring

36

2

Full English

written exam

S003411

Medium heat transfer molecular dynamics (Full English)

Spring

36

2

Lecture

written exam

S003412

Simulation and control of refrigeration systems (Full English)

Spring

36

2

Full English

written exam




Integrated Quality Training

Innovation and Entrepreneurship Practice

 Contests, teaching practice, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation and Academic Writing Practice

Students are required to participate in at least 2 academic activities, and write 1 academic paper.

1


Non-exam  


Note:  

 (1) The minimum creditsfor master students: 26 credits for students of science and engineering, 28 credits for students of medical science, 30 credits for students of liberal arts, economics and management, with 16 credits from compulsory courses. In addition, students should obtain 5 credits from Integrated Quality Training.

 (2) All compulsory courses are normally required to be completed within one year after registration.

(3) Compulsory courses and public elective courses are subject to this course plan;specialized elective courses can be chosen from “Graduate Courses Catalog”.






动力工程及工程热物理


(学科代码:080700


科简介400字以内


学科由中国锅炉学创始人范从振、汽轮机学创始人王守泰、热工学创始人夏彦儒和热工控制学创始人钱钟韩在国立中央大学(本校前身)创建,是中国动力工程及工程热物理学科的发源地之一,至今已培养出包括7名中国科学院/工程院院士在内的近万名热能动力类高级专门人才。本学科是江苏省优势学科和东南大学“985工程”、“211工程”、“双一流”重点建设学科,内含热能工程、工程热物理、动力机械及工程、制冷与低温工程、流体机械及工程等二级学科,其中热能工程为国家重点学科、制冷与低温工程为江苏省重点学科。拥有火电机组振动国家工程研究中心、能源热转换及其过程测控教育部重点实验室、江苏省污染治理与资源化工程技术研究中心江苏省太阳能技术重点实验室等科研基地。



培养目标150字左右,以下内容仅供参考


掌握马列主义毛泽东思想和邓小平理论,热爱祖国,遵纪守法、学风严谨,实事求是,有良好的敬业精神和合作精神。掌握坚实的动力工程及工程热物理学科的基础理论和系统的专门知识,具有从事科学研究工作或独立担负专门技术工作的能力,硕士学位获得者能胜任科研,科技开发及教学工作。熟练掌握一门外语。



研究方向


1)流体流动与传热传质,2)燃烧与污染控制技术,3)热工测量与自动化控制,4)热力系统仿真、优化与诊断,5)动力机械振动分析及应用,6)制冷与空调技术,7)新能源技术


培养年限


一般为2-3年,最长可延至4年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学硕士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

文献阅读在论文选题及研究方向范围内至少阅读文献30篇,其中外文文献20篇,完成一篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文学术水平学位论文应在调查研究的基础上,选择有一定学术价值,对国民经济发展有一定意义的课题。围绕论文开展科研工作的时间不少于1年。申请硕士学位前,至少必须满足如下条件之一①第1作者在SCI源刊、EI源刊、国际学术会议上发表1篇学术论文; ②第1作者在《东南大学能源与环境学院硕士研究生教育重要刊物目录》上发表1篇学术论文,并申请1项国家发明专利(获申请号,研究生本人排名第一,或导师排名第一研究生本人排名第二);③获得省部级科研成果奖1项(申请者有获奖证书)。



附表:

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共

必修课

S000301 B000113

中国特色社会主义理论与实践研究

春秋季

32

2

面授讲课

笔试

留学生选中国概况

中国概况

32

2

面授讲课

笔试

S000151 S000156

硕士学位外语

春秋季

64

4

面授讲课

笔试

留学生选汉语

汉语

64

4

面授讲课

笔试

公共

选修课


S000302

自然辩证法概论


16

1

面授讲课

笔试

必选

一门


马克思主义与社会科学方法论


16

1




学术道德


16

1



必选


创新创业课程


16

1



必选


工程伦理


16

1





领导力素养课


16

1




专业

必修课

S003100

学科研究前沿与发展动态系列讲座(10次)

春秋季

20

1

面授讲课

笔试

必选

S000111

工程矩阵理论

秋季

54

3

面授讲课

笔试

至少选1

S000112

数值分析

秋季

54

3

面授讲课

笔试

S000114

数理统计

秋季

36

2

面授讲课

笔试

S003103

高等工程热力学

秋季

36

2

面授讲课

笔试

至少选2门,其中全英文课程至少1门(不得与汉语课程重复)

S003106

高等流体力学

秋季

54

3

面授讲课

笔试

S003107

高等传热学

秋季

54

3

面授讲课

笔试

S003112

高等工程热力学(全英文)

秋季

36

2

全英文

笔试

S003114

高等流体力学(全英文)

秋季

54

3

全英文

笔试

S003115

高等传热学(全英文)

秋季

54

3

全英文

笔试

S003104

燃烧理论和技术

秋季

36

2

面授讲课

笔试

至少选2

S003105

热工控制理论与技术

秋季

36

2

面授讲课

笔试

S003204

动力机械运行特性及诊断

春季

36

2

面授讲课

笔试

S003205

热能系统动态特性

春季

36

2

面授讲课

笔试

S003231

多相流动力学

春季

36

2

面授讲课

笔试

S003401

低温与制冷原理

秋季

36

2

面授讲课

笔试

S003410

室内热湿环境营造过程的热学原理

秋季

36

2

面授讲课

笔试

S003508

热工测量理论及应用

春季

36

2

讲课+讨论

笔试

专业

选修课

S003113

燃烧理论和技术(全英文)

秋季

36

2

全英文

笔试

7学分,

需要包含跨领域课程至少1门(选择其他专业课程)

S003229

热力发电过程的仿真与控制(全英文)

春季

36

2

全英文

笔试

S003232

室内空气品质技术(全英文)

秋季

36

2

全英文

笔试

S003331

能源与环境管理(全英文)

春季

36

2

全英文

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

36

2

讲课+讨论

笔试

S003408

集散控制与现场总线控制技术(全英文)

春季

36

2

全英文

笔试

S003411

介质传热分子动力学(全英文)

春季

36

2

面授讲课

笔试

S003412

制冷系统的模拟与控制(全英文)

春季

36

2

其它

笔试


其他新开课程






综合

素养

环节

创新创业实践

竞赛、教学实践、出国短访、生产实践(临床实践)或社会调查等。

3


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次(留学生至少3次)。

1


考查


参加学术活动及学术论文撰写

参加学术研讨活动至少2次并撰写学术论文1篇。

1


考查



:1.在校期间课程总学分最低要求为:26学分,其中必修课程最低学分要求为: 16学分, 其余为选修课程。此外,还应完成综合素养环节5学分。

2必修课程学习一般应在入学后一学年内完成。

3必修课程和公共选修课根据此表,专业选修课从“研究生课程目录”中选择。










DisciplinePower Engineering and Engineering Thermophysics


(Discipline Code:080700)



Brief Introductionto Discipline (within 400 words)


The discipline was founded by Fan Congzhen, founder of Chinese boiler science, Wang Shoutai, founder of steam turbines, Xia Yanru, founder of thermal engineering, and Qian Zhonghan, founder of thermal control science, at the National Central University (predecessor of the University), which is one of the birthplaces of Chinas Power Engineering and Engineering Thermophysics disciplines. Up to now, nearly 10,000 senior engineers in thermal power including 7 academicians of the Chinese Academy of Sciences/Engineering have been trained. This discipline is a dominant discipline in Jiangsu Province, the “985 Project”, “211 Project” and “Double First-class”key construction disciplines of Southeast University, including several second-class disciplines like thermal engineering, engineering thermophysics, power machinery and engineering, refrigeration and cryogenic engineering, fluid machinery and engineering, in which thermal engineering is a national key discipline, refrigeration and cryogenic engineering is a key discipline in Jiangsu Province. It has scientific research bases such as National Engineering Research Center of Turbogenerator Vibration, Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Jiangsu Engineering Research Center for pollution treatment and resource utilization, and the Key Laboratory of Solar Energy Technology of Jiangsu Province.



Objectives (about 150 words; the following is for reference only:

Students willgrasp the fundamental principles ofMarxism, stick to the Four Cardinal Principles,have the sense of patriotic duty,abide by the laws and regulations,and behave upright. Meanwhile, the students will develop their spirit of serving the people and devoting to the construction of socialism.


Students will acquire solid and broad theoretical principles as well as systematical and in-depth expertise in the field of power engineering and engineering thermophysics, etc. Students will have the capability of doing scientific research independently and solving relevant technical problems. They will be competent for scientific research, technology development, teaching, etc.


Students will acquire proficiency in at least one language other than Chinese.



Research Directions

(1) fluid flow and heat and mass transfer; (2) combustion and pollution control technology; (3) thermal measurement and automation control; (4) thermal system simulation, optimization and diagnosis; (5) dynamic mechanical vibration analysis and application; (6) refrigeration and air conditioning technology; (7) new energy technology.




Duration

2-3 years usually, and no more than 4 years.



Credit Requirements and Curricula (refer to the Appendix)



Thesis Proposal

in accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis


Interim Assessment

in accordance with Measures of Southeast University on Medium-term Assessment and Screening for Master Graduates


Thesis

including requirements on literature reading, thesis writing, publication, etc.

Literature Reading (for reference only)

Students are required to read at least 30 literatures (including 20 literatures written in foreign languages) related to their thesis and research direction, and write a review.


Thesis Writing(for reference only)

In addition to compliance with the provisions of University, thesis must be written in a systematic and complete manner, presenting clear concepts, correct arguments, realistic description, concise writing structure, smooth and concise writing style, correct calculation, reliable data, and clear icons.


Thesis Evaluation(for reference only)

Thesis should be written based on students’ own study and research. The findings presented in the thesis should have higher academic value and positive impact on economic development of China. Students are required to conduct at least one year research. At least one of the following conditions must be met before being eligible for applying for a Master's Degree: 1. Publish 1 academic paper in the SCI Source Journal, EI Source Journal, or International Academic Conference as the first author; 2. Publish 1 academic paper in the Catalogue of Important Publications of the Graduate School of Energy and Environment of Southeast University as the first author, and apply for 1 national invention patent (obtained the application number, the graduate student himself ranked first, or the tutor ranked first and the graduate student ranked second); 3. Win 1 provincial and ministerial level scientific research achievement award (the applicant has the award certificate).




Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching

Type

Assessment

Note

Public Compulsory Courses


Theory and Practice of Socialism 

with Chinese Characteristics


32

2



international students only


Introduction to China


32

2




Academic English for Graduate Students


64

4



international students only


Chinese Language


64

4



Public Elective

Courses


An Introduction to Nature Dialectics  


16

1



Choose either of the two


Marxism and Social Science Methodology 


16

1




Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship  


16

1



compulsory


Engineering Ethics


16

1





Leadership


16

1




 Specialized Compulsory Courses


S003100

Lectures on Frontiers and Development of Discipline Research (10 times)

Spring and autumn

20

1

Lecture

written exam

compulsory

S000111

Engineering matrix theory

Autumn

54

3

Lecture

written exam

at least 1 course

S000112

Numerical analysis

Autumn

54

3

Lecture

written exam

S000114

Mathematical statistics

Autumn

36

2

Lecture

written exam

S003103

Advanced engineering thermodynamics

Autumn

36

2

Lecture

written exam

at least 2 courses, including at least 1 full English course (cannot be repeated with Chinese courses)

S003106

Advanced fluid dynamics

Autumn

54

3

Lecture

written exam

S003107

Advanced heat transfer

Autumn

54

3

Lecture

written exam

S003112

Advanced engineering thermodynamics (full English)

Autumn

36

2

Full English

written exam

S003114

Advanced fluid dynamics (full English)

Autumn

54

3

Full English

written exam

S003115

Advanced heat transfer (full English)

Autumn

54

3

Full English

written exam

S003104

Combustion theory and technology

Autumn

36

2

Lecture

written exam

at least 2 courses

S003105

Thermal Control Theory and Technology

Autumn

36

2

Lecture

written exam

S003204

Power machine operating characteristics and diagnosis

Spring

36

2

Lecture

written exam

S003205

Thermal system dynamics

Spring

36

2

Lecture

written exam

S003231

Multiphase flow dynamics

Spring

36

2

Lecture

written exam

S003401

Principle of low temperature and refrigeration

Autumn

36

2

Lecture

written exam

S003410

The thermal principle of the indoor heat and humidity environment construction process

Autumn

36

2

Lecture

written exam

S003508

Thermal measurement theory and application

Spring

36

2

Lecture + discussion

written exam

Specialized Elective Courses

S003113

Combustion theory and technology (full English)

Autumn

36

2

Full English

written exam

≥7 credits, including at least 1 interdisciplinary course (choose other professional courses)

S003229

Simulation and control of thermal power generation process (full English)

Spring

36

2

Full English

written exam

S003232

Indoor air quality technology (full English)

Autumn

36

2

Full English

written exam

S003331

Energy and Environmental Management ( Full English)

Spring

36

2

Full English

written exam

S003338

Coal-fired air pollutant control technology (full English)

Spring

36

2

Lecture + discussion

written exam

S003408

Distributed Control and Fieldbus Control Technology (Full English)

Spring

36

2

Full English

written exam

S003411

Medium heat transfer molecular dynamics (Full English)

Spring

36

2

Lecture

written exam

S003412

Simulation and control of refrigeration systems (Full English)

Spring

36

2

Full English

written exam




Integrated Quality Training

Innovation and Entrepreneurship Practice

 Contests, teaching practice, international short visits, practice and internship (clinical practice), social survey, etc.

3


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for international students).

1


Non-exam


Academic Activity Participation and Academic Writing Practice

Students are required to participate in at least 2 academic activities, and write 1 academic paper.

1


Non-exam  


Note:  

 (1) The minimum creditsfor master students: 26 credits for students of science and engineering, 28 credits for students of medical science, 30 credits for students of liberal arts, economics and management, with 16 credits from compulsory courses. In addition, students should obtain 5 credits from Integrated Quality Training.

 (2) All compulsory courses are normally required to be completed within one year after registration.

(3) Compulsory courses and public elective courses are subject to this course plan;specialized elective courses can be chosen from “Graduate Courses Catalog”.




资源与环境(专业学位)


(类别:0857


类别简介


东南大学资源与环境类别拥有悠久的发展历史,从上世纪40年代初期中央大学土木工程系设置的卫生工程学组算起,已有70多年的历史。恢复高考后,我校是教育部直属第一批5所全国最早创办环境工程专业的院校(1979年)。东南大学本类别包含环境学科、测绘学科等相关博士、硕士和本科完整教学体系。本类别拥有“环境科学与工程实验中心”、“江苏省污染控制及资源化工程技术研究中心”、“江苏省污泥安全处置与资源化工程研究中心”、“测绘仪器中心”和“地理信息工程实验室”,并与东南大学公共卫生学院共建“东南大学环境医学工程教育部重点实验室”,具有完备的科学研究条件。


培养目标


培养面向未来国家建设需要,适应未来科技进步,德智体全面发展,掌握本学科的基础理论和专业知识;了解资源与环境类别的技术现状和发展趋势,掌握解决工程问题的先进技术方法和手段;能胜任工程项目的研究、设计、施工、管理等工作,具有良好的创新能力和国际视野,担当引领未来和造福人类的国家资源环境及相关行业的领军人才。


研究方向


1)水污染控制与水处理技术;(2)大气污染控制和废气净化技术;(3)固体废弃物处理处置与资源化技术;(4)水环境生态修复工程;(5)饮用水安全保障理论与技术;(6)建筑环境技术;(7)环境功能材料;(8)精密工程测量技术;(9)导航定位技术;(10)遥感信息分析技术


培养年限


一般为3年,最长可延至4年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学硕士研究生中期考核与筛选办法》执行。


学位论文

文献阅读

文献阅读在论文选题及研究方向范围内至少阅读文献100篇,其中外文文献50篇,完成1篇综述。

论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文选题应符合国家重大需求,具有较强的技术创新和工程应用价值。围绕论文开展科研工作的时间不少于1年。申请硕士学位成果按照学生所在学院考核要求执行。


附表:资源与环境类别专业学位硕士课程设置

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共必修课

S000301 B000113

中国特色社会主义理论与实践研究

春秋季

32

2

面授讲课

笔试

留学生选中国概况

中国概况

32

2

面授讲课

笔试

S000151 S000156

硕士学位外语

春秋季

64

4

面授讲课

笔试

留学生选汉语

汉语

64

4

面授讲课

笔试


工程伦理


16

1




公共选修课

S000302

自然辩证法概论


16

1



必选

一门


马克思主义与社会科学方法论


16

1




学术道德


16

1



必选


创新创业类课程


16

1



必选

类别

必修课

S000111

工程矩阵理论

秋季

48

3

面授讲课

笔试

1

S000112

数值分析

秋季

48

3

面授讲课

笔试

S003110

高等应用流体力学

秋季

32

2

面授讲课

笔试

至少选1

S003307

微生物生理生化基础

秋季

32

2

面授讲课

笔试

S003308

环境流体力学

秋季

32

2

面授讲课

笔试

B021142

GNSS高精度动态定位原理与应用

春季

32

2

讲课/研讨

笔试

S000133

职业素质教育(学院讲座)

春秋季

16

1

面授讲课

笔试

必选

S003315

水的物化处理原理

春季

32

2

面授讲课

笔试

至少选1

S003330

大气污染控制原理与技术

秋季

32

2

面授讲课

笔试

S003339

废弃物管理与资源化技术(工程)

秋季

32

2

面授讲课

笔试

S021418

遥感对地观测技术

春季

32

2

讲课/研讨

笔试

S003336

高等环境化学(全英文)

秋季

36

2

面授讲课

笔试

S003232

室内空气品质技术(全英文)

秋季

36

2

面授讲课

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

36

2

讲课+讨论

笔试








类别

选修课

S003324

固体废弃物处理处置工程设计

秋季

32

2

讲课+讨论

笔试

≥5学分

S003325

大气污染控制工程设计

春季

32

2

讲课+讨论

笔试

S003328

水污染控制工程设计

秋季

32

2

讲课+讨论

笔试

S003340

水环境生态工程设计技术

春季

32

2

面授讲课

笔试

S003341

城市生态规划与工程学

秋季

32

2

讲课+讨论

笔试

S021405

变形观测

秋季

32

2

讲课/实验

考查

S021419

工程应用程序设计方法

秋季

32

2

讲课/研讨/实验

考查

S021509

现代工程项目管理

秋季

32

2

讲课

考查

B021210

多元参数最优估计理论

春季

32

2

讲课/研讨

考查


其他课程从“研究生课程目录”中选择






综合素养环节

专业实践

累计不少于12个月的专业实践

(其中校外至少6个月)

6


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次;非全日制研究生和留学研究生至少3次(学风建设、法律、心理健康讲座必听)。

1


考查


参加学术活动及学术论文撰写

参加学术研讨活动至少2次并撰写学术论文1篇。

1


考查



:1. 在校期间课程总学分最低要求为:工程硕士26学分,其中必修课程最低学分要求为16学分;其他专业学位类别的课程设置及学分要求按照《全日制硕士专业学位(分类别)研究生指导性培养方案》(学位办【200923号)文件要求执行。

2必修课程学习一般应在入学后一学年内完成。

3必修课程和公共选修课根据此表,专业选修课程从“研究生课程目录”中选择。

4. 所有课程中至少有一门全英文课程。








DisciplineResource and Environment (professional degree)


(Category Code: 0857)



Brief Introduction to Discipline


The Resource and Environment discipline of Southeast University has a long history of development. It has more than 70 years since the health engineering group set up by the Civil Engineering Department of the Central University in the early 1940s. After the resumption of the college entrance examination, our school is one of the first five institutions in the country to establish environmental engineering under the Ministry of Education (1979). The discipline has a complete teaching system for doctoral, master, undergraduate and continuing education of subjects including Environmental Science, Surveying and Mapping. The discipline has the “Environmental Science and Engineering Experiment Center”, the “Jiangsu Provincial Pollution Control and Resource Engineering Technology Research Center”, " Jiangsu Research Center of Sludge Safety Disposal and Resource Utilization ", "Surveying and Mapping Instrument Center" and "Geographic Information Engineering Laboratory". Meanwhile it has the “Key Laboratory of Environmental Medical Engineering of the Southeast University” which is established with the School of Public Health. The discipline has complete basic conditions for carrying out scientific research.


Objectives


The training should be oriented to the future national construction needs, adapt to the future scientific and technological progress, students will develop morally, intellectually, physically, aesthetically and laboriously in a comprehensive way, master the basic theories and professional knowledge of the subject; students will understand the technical status and development trends of the discipline, and master the advanced technical methods and modern technical means to solve engineering problems; students will be qualified for the research, design, construction, management, etc. of engineering projects, and have good innovation ability and international vision, to become the leader of Resource and Environment and related industries to lead the future and benefit mankind.


Research Directions

(1) Water pollution control and water treatment technology; (2) Air pollution control and waste gas purification technology; (3) Solid waste treatment and recycling technology; (4) Water environment ecological restoration project; (5) Drinking water safety guarantee theory and technology; (6) Building environmental technology; (7) Environmental functional materials; (8) Precision engineering measurement technology; (9) Navigation and positioning technology; (10) Remote sensing information analysis technology.


Duration

The time limit is generally 3 years, and can be extended to 4 years.


Credit Requirements and Curricula (refer to the Appendix)


Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis


Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Master Graduates


Thesis

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Students are required to read at least 100 literatures (including 50 literatures written in foreign languages) related to their thesis and research direction, and to complete a review.


Thesis Writing

In addition to compliance with the provisions of the University, the thesis must be written in a systematic and complete manner, presenting clear concepts, correct arguments, rigorous description, correct calculation, reliable data, well-arranged structure, smooth and concise writing, and clear icons.


Thesis Evaluation

The thesis should choose the subject which meets the major needs of the country, has strong technical innovation and engineering application value. Students are required to conduct researchnot less than one year. The results of applying for master's degree shall be implemented according to the assessment requirements of the department where the students belong.


Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching Type

Assessment

Note

Public Compulsory Courses

S000301

Theory and Practice of Socialism 

with Chinese Characteristics

Spring and autumn

32

2

Lecture

Written exam


B000113

Introduction to China

32

2

Lecture

Written exam

International students only

S000151

Academic English for Graduate Students

Spring and autumn

64

4

Lecture

Written exam


S000156

Chinese Language

64

4

Lecture

Written exam

International students only


Engineering Ethics


16

1



Compulsory for degree postgraduates majoring in engineering

Public Elective

Courses

S000302

An Introduction to Nature Dialectics  


16

1



Choose either of the two


Marxism and Social Science Methodology 


16

1




Academic Ethics


16

1



compulsory


Innovation and Entrepreneurship


16

1



compulsory

Specialized Compulsory Courses  

S000111

Engineering matrix theory

Autumn

48

3

Lecture

Written exam

Choose either of the two

S000112

Numerical analysis

Autumn

48

3

Lecture

Written exam

S003110

Advanced applied fluid dynamics

Autumn

32

2

Lecture

Written exam

S003307

Microbial physiology and biochemistry Foundation

Autumn

32

2

Lecture

Written exam

S003308

Environmental fluid dynamics

Autumn

32

2

Lecture

Written exam

B021142

Principle and application of GNSS high precision dynamic positioning

Spring

32

2

Lecture + discussion

Written exam

S000133

Vocational Quality Education (College Lecture)

Spring and autumn

16

1

Lecture

Written exam

Compulsory

S003315

Principle in water physicochemical treatment

Spring

32

2

Lecture

Written exam

At least 1 course

S003330

Air pollution control principles and technologies

Autumn

32

2

Lecture

Written exam

S003339

Waste Management and Resource Technology (Engineering)

Autumn

32

2

Lecture

Written exam

S021418

Remote Sensing Earth Observation Technology

Spring

32

2

Lecture + discussion

Written exam

S003336

Advanced environmental chemistry (English)

Autumn

36

2

Lecture

Written exam

S003232

Indoor Air Quality Technology (English)

Autumn

36

2

Lecture

Written exam

S003338

Air pollutants control from coal combustion (English)

Spring

36

2

Lecture + discussion

Written exam

Specialized Elective Courses

S003324

Engineering design of solid waste treatment and disposal

Autumn

32

2

Lecture + discussion

Written exam

≥5 credits

S003325

Engineering design of air pollution control

Spring

32

2

Lecture + discussion

Written exam

S003328

Engineering design of water pollution control

Autumn

32

2

Lecture + discussion

Written exam

S003340

Water environment ecological engineering design technology

Spring

32

2

Lecture  

Written exam

S003341

Urban ecological planning and engineering


Autumn

32

2

Lecture + discussion

Written exam

S021405

Deformation observation

Autumn

32

2

Lecture + experiment

Non-exam

S021419

Engineering application programming method

Autumn

32

2

Lecture + discussion+ experiment

Non-exam

S021509

Modern engineering project management

Autumn

32

2

Lecture  

Non-exam

B021210

Optimal estimation theory of multivariate parameters

Spring

32

2

Lecture + discussion

Non-exam


Other new courses










Integrated Quality Training

Professional Practice

No less than 12 months of professional practice accumulatively (no less than 6 months out of University)

6


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including compulsory lectures on academic atmosphere construction, law and psychological health (at least 3 lectures for part time graduate students and international students).

1


Non-exam


Academic Activity Participation and Academic Writing Practice

Students are required to participate in at least 2 academic activities and write 1 academic paper.

1


Non-exam  


Note:  

(1) The minimum creditsfor master students: 26 credits for degree postgraduates majoring in engineering, with at least 16 credits for compulsory courses; the curricula and credit requirements for degree postgraduates of other majors are subject to "Full-time Master's Degree (Classification) Postgraduate Guidance Training Program" (Degree Office [2009] 23).

 (2) All compulsory courses are normally required to be completed within one year after registration.

 (3) Compulsory courses and public elective courses are subject to this course plan;specialized elective courses can be chosen from “Graduate Courses Catalog”.

(4) At least one full English course.







能源动力(专业学位)


(类别代码:0858


类别简介


东南大学能源动力类专业始创于1923年成立的国立东南大学电机系,是东南大学最早设立的三大工程专业之一,目前重点依托动力、电气等学科。其中动力工程及工程热物理学科由中国锅炉学创始人范从振、汽轮机学创始人王守泰、热工学创始人夏彦儒和热工控制学创始人钱钟韩在国立中央大学(本校前身)创建,是中国动力工程及工程热物理学科的发源地之一。电气工程学科是全国首批有权授予硕士、博士学位的单位之一,是中国一流电气人才和创新成果的重要培育基地,在国内外电气领域具有较高的学术声誉。吴玉麟、陈章、吴大榕、程式、杨简初、严一士、闵华、周鹗、陈珩等一批知名电气学者、专家曾在学科从教。能源动力类别专业拥有火电机组振动国家工程研究中心、能源热转换及其过程测控教育部重点实验室、江苏省太阳能技术重点实验室、伺服控制教育部技术工程中心、江苏省智能电网技术与装备重点实验室、江苏省电力工程实验中心、国家级工程实践教育中心等教学科研基地。


培养目标


培养面向未来国家建设需要,适应未来科技进步,德智体美劳全面发展,掌握本学科的基础理论和专业知识;了解各类能源动力的技术现状和发展趋势,掌握解决工程问题的先进技术方法和手段;能胜任工程项目的研究、设计、施工、管理等工作,具有良好的创新能力和国际视野,担当引领未来和造福人类的国家能源动力及相关行业的领军人才。


研究方向


  1. 能源动力装备及系统;(2)能源清洁高效利用;(3)能源动力过程测控与信息化;(4)新能源与可再生能源技术;(5)制冷与人工环境;(6)能源系统规划与运行;(7)区域综合能源系统;(8)能源传输技术;(9)储能与先进能源材料


培养年限


一般为3年,最长可延至4年。


学分要求和课程设置(见附表)


开题报告

按照《东南大学研究生论文选题和开题报告的原则与要求》执行。


中期考核

按照《东南大学硕士研究生中期考核与筛选办法》执行。


学位论文


文献阅读

文献阅读在论文选题及研究方向范围内至少阅读文献100篇,其中外文文献50篇,完成1篇综述。


论文撰写

除符合学校规定外,学位论文必须是一篇系统、完整的学术论文,要求概念清楚、立论正确、论述严谨、计算正确、数据可靠,且层次分明、文笔简洁、流畅、图标清晰。


论文学术水平

论文选题应符合国家重大需求,具有较强的技术创新和工程应用价值。围绕论文开展科研工作的时间不少于1年。申请硕士学位成果按照学生所在学院考核要求执行。


附表:能源动力类别专业学位硕士课程设置

组别

课程

编号

课程名称

开课

学期

学时

学分

授课

方式

考试

方式

备注

公共必修课


中国特色社会主义理论与实践研究


32

2





硕士学位外语


64

4





工程伦理


16

1




公共选修课


自然辩证法概论


16

1



必选

一门


马克思主义与社会科学方法论


16

1




学术道德


16

1



必选


创新创业类课程


16

1



必选



专业必修课

S000111

工程矩阵理论

秋季

48

3

面授讲课

笔试

1

S000112

数值分析

秋季

48

3

面授讲课

笔试

S000133

职业素质教育(学院讲座)

春秋季

16

1

面授讲课

笔试

必选

S003103

高等工程热力学

秋季

32

2

面授讲课

笔试

至少选1

S003104

燃烧理论和技术

秋季

32

2

面授讲课

笔试

S003108

高等工程传热学

秋季

32

2

面授讲课

笔试

S003109

热工控制理论与应用

秋季

32

2

面授讲课

笔试

S003110

高等应用流体力学

秋季

32

2

面授讲课

笔试

S016101

电力系统稳态分析

秋季

48

3

面授

笔试

S016134

电网络理论

秋季

48

3

面授

笔试

S016167

电力电子技术及应用

春季

48

3

面授

笔试

S016119

现代电机调速理论与控制技术

秋季

48

3

面授

笔试

S016124

高压电气绝缘及测试技术

春季

32

2

面授

笔试

S003203

流化床理论及应用

秋季

32

2

面授讲课

笔试

至少选1

S003223

制冷工程技术

春季

32

2

面授讲课

笔试

S003227

电站设备设计与运行

春季

32

2

讲课+讨论

笔试

S003330

大气污染控制原理与技术

秋季

32

2

面授讲课

笔试

S003506

能源工程测量技术

春季

32

2

面授讲课

笔试

S003229

热力发电过程的仿真与控制(全英文)

春季

32

2

全英文

笔试

S003232

室内空气品质技术(全英文)

秋季

32

2

全英文

笔试

S003338

燃煤大气污染物控制技术(全英文)

春季

32

2

讲课+讨论

笔试

S003411

介质传热分子动力学(全英文)

春季

32

2

面授讲课

笔试

S003412

制冷系统的模拟与控制(全英文)

春季

32

2

其它

笔试

S016102

电力系统动态分析

春季

48

3

面授

笔试

S016165

现代控制理论

春季

32

2

面授

笔试

S016132

电气测试技术

秋季

48

3

面授

笔试

S016105

电机内的电磁场

春季

48

3

面授

笔试

S016106

交流电机统一理论

秋季

48

3

面授

笔试

S016171

高压直流及柔性交流输电理论与技术(全英文)

秋季

32

2

面授

笔试

S016209

电力系统经济学原理(全英文)

春季

32

2

面授

笔试

S016170

控制系统动力学(全英文)

春季

48

3

面授

笔试

S016205

新能源与分布式发电(全英文)

春季

32

2

面授

笔试

专业选修课

S003111

热工控制系统设计与应用

春季

32

2

讲课+讨论

笔试

设计、实践、案例类课程至少选择5学分

S003226

电站热力系统设计

春季

32

2

面授讲课

笔试

S003234

暖通工程设计

秋季

32

2

面授讲课

笔试

S003324

固体废弃物处理处置工程设计

秋季

32

2

讲课+讨论

笔试

S003325

大气污染控制工程设计

春季

32

2

讲课+讨论

笔试

S016212

电力系统综合实践

秋季

64

4

面授


S016210

电力电子综合实践

秋季

64

4

面授


S016176

电机及其控制系统综合实践

秋季

64

4

面授


S016178

互联电网态势分析案例课

秋季

16

1

面授


S016180

电力电子化电力系统新问题探讨案例课

秋季

16

1

面授


S016182

电力电子与电机系统设计案例课

秋季

16

1

面授


S016181

配电网运行综合评价案例课

秋季

16

1

面授


S016179

高电压与绝缘技术案例课

秋季

16

1

面授



其它课程从“研究生课程目录”中选择






综合素养环节

专业实践

累计不少于12个月的专业实践

(其中校外至少6个月)

6


考查


选听人文与科学素养系列讲座

至少8次,其中必须选听学风建设、法律、心理健康讲座至少1次;非全日制研究生和留学研究生至少3次(学风建设、法律、心理健康讲座必听)。

1


考查


参加学术活动及学术论文撰写

参加学术研讨活动至少2次并撰写学术论文1篇。

1


考查



:1. 在校期间课程总学分最低要求为:工程硕士26学分,其中必修课程最低学分要求为16学分;其他专业学位类别的课程设置及学分要求按照《全日制硕士专业学位(分类别)研究生指导性培养方案》(学位办【200923号)文件要求执行。

2必修课程学习一般应在入学后一学年内完成。

3必修课程和公共选修课根据此表,专业选修课程从“研究生课程目录”中选择。

4. 所有课程中至少有一门全英文课程。




DisciplineEnergy and Power (professional degree)


(Category Code:0858)



Brief Introduction to Discipline

The Energy and Power discipline of Southeast University was founded in 1923 that originated from the Department of Electrical Engineering of National Southeast University. It is one of the three earliest engineering disciplines in Southeast University. At present, it mainly based on power, electrical and other disciplines. The discipline of Power Engineering and Engineering Thermophysics was founded by Congzhen Fan, founder of Chinese Boiler Science, Shoutai Wang, founder of Chinese Steam Turbine Science, Yanru Xia, founder of Chinese thermal engineering, and Zhonghan Qian, founder of Chinese thermal control science, in National Central University (the predecessor of Southeast University). It is one of the birthplaces of the discipline of Power Engineering and Engineering Thermophysics in China. The discipline of Electrical Engineering is one of the first batch of institutes authorized to confer master's and doctor's degrees in China. It is an important teaching base for China's first-class electrical talents and innovative achievements, and has a high academic reputation in the electrical field at home and abroad. Well-known electrical scholars and experts including Yulin Wu, Zhang Chen, Darong Wu, Shi Cheng, Jianchu Yang, Yishi Yan, Hua Min, E Zhou and Heng Chen have taught in the discipline. The Energy and Power discipline has teaching and scientific research bases including National Engineering Research Center for Thermal Power Unit Vibration, the Key Laboratory of Energy Thermal Conversion and Process Measurement and Control, Key Laboratory of Solar Energy Technology of Jiangsu Province,Servo Control Technology Engineering Center of Ministry of Education, Jiangsu Key Laboratory of Smart Grid Technology and Equipment, Jiangsu Electric Power Engineering Experimental Center, and National Engineering Practice Education Center.


Objectives

The training should be oriented to the future national construction needs, adapt to the future scientific and technological progress, students will develop morally, intellectually, physically,aesthetically and laboriously in a comprehensive way, master the basic theories and professional knowledge of the subject; students will understand the technical status and development trends of the discipline, and master the advanced technical methods and modern technical means to solve engineering problems; students will be qualified for the research, design, construction, management, etc. of engineering projects, and have good innovation ability and international vision, to become the leader of national energy power and related industries to lead the future and benefit mankind.


Research Directions

(1) Energy and power equipment and system;

(2) Clean and efficient utilization of energy;

(3) Measurement, control and informatization of energy and power process;

(4) New energy and renewable energy technology;

(5) Refrigeration and artificial environment;

(6) Energy system planning and operation;

(7) Regional integrated energy system;

(8) Energy transmission technology;

(9) Energy storage and advanced energy materials.


Duration

The time limit is generally 3 years, and can be extended to 4 years.


Credit Requirements and Curricula (refer to the Appendix)


Thesis Proposal

In accordance with Principles and Requirements of Southeast University on Topic Selection and Topic Report of Graduate Thesis


Interim Assessment

In accordance with Measures of Southeast University on Medium-term Assessment and Screening for Master Graduates


Thesis

Including requirements on literature reading, thesis writing, publication, etc.


Literature Reading

Students are required to read at least 100 literatures (including 50 literatures written in foreign languages) related to their thesis and research direction, and to complete a review.


Thesis Writing

In addition to compliance with the provisions of the University, the thesis must be written in a systematic and complete manner, presenting clear concepts, correct arguments, rigorous description, correct calculation, reliable data, well-arranged structure, smooth and concise writing, and clear icons.


Thesis Evaluation

The thesis should choose the subject which meets the major needs of the country, has strong technical innovation and engineering application value. Students are required to conduct researchnot less than one year. The results of applying for master's degree shall be implemented according to the assessment requirements of the department where the students belong.


Appendix

Course Type

Course Number

Courses

Terms

Class Hours

Credits

Teaching Type

Assessment

Note

Public Compulsory Courses


Theory and Practice of Socialism 

with Chinese Characteristics


32

2





Academic English for Graduate Students


64

4





Engineering Ethics


16

1




Public Elective

Courses


An Introduction to Nature Dialectics  


16

1



Choose either of the two


Marxism and Social Science Methodology 


16

1




Academic Ethics


16

1



Compulsory


Innovation and Entrepreneurship


16

1



Compulsory

Specialized Compulsory Courses  

S000111

Engineering Matrix Mheory

Autumn

48

3

Lecture

Written exam

At least 1 course

S000112

Numerical Mnalysis

Autumn

48

3

Lecture

Written exam

S000133

Vocational Quality Education (College Lecture)

Spring and autumn

16

1

Lecture

Written exam

Compulsory

S003103

Advanced Engineering Thermodynamics

Autumn

32

2

Lecture

Written exam

At least 1 course

S003104

Combustion Theory and Technology

Autumn

32

2

Lecture

Written exam

S003108

Advanced Engineering Heat Transfer

Autumn

32

2

Lecture

Written exam

S003109

Thermal Control Theory and Application

Autumn

32

2

Lecture

Written exam

S003110

Advanced Applied Fluid Dynamics

Autumn

32

2

Lecture

Written exam

S016101

Steady State Analysis of Power System

Autumn

48

3

Lecture

Written exam

S016134

Electric Network Theory

Autumn

48

3

Lecture

Written exam

S016167

Power Electronics Technology and its Application

Spring

48

3

Lecture

Written exam

S016119

Modern Motor Speed Control Theory and Control Technology

Autumn

48

3

Lecture

Written exam

S016124

High Voltage Electrical Insulation and Testing Technology

Spring

32

2

Lecture

Written exam

S003203

Fluidized Bed Theory and Application

Autumn

32

2

Lecture

Written exam

At least 1 course

S003223

Refrigeration Engineering Technology

Spring

32

2

Lecture

Written exam

S003227

Power Station Equipment Design and Operation

Spring

32

2

Lecture + discussion

Written exam

S003330

Air Pollution Control Principles and Technologies

Autumn

32

2

Lecture

Written exam

S003506

Energy Engineering Measurement Technology

Spring

32

2

Lecture

Written exam

S003229

Simulation and Control of Thermal Power Generation Process (English)

Spring

32

2

English

Written exam

S003232

Indoor Air Quality Technology (English)

Autumn

32

2

English

Written exam

S003338

Air pollutants control from coal combustion (English)

Spring

32

2

Lecture + Discussion

Written exam

S003411

Molecular dynamics of medium heat transfer (English)

Spring

32

2

Lecture

Written exam

S003412

Simulation and control of refrigeration system (English)

Spring

32

2

Others

Written exam

S016102

Dynamic analysis of power system

Spring

48

3

Lecture

Written exam

S016165

modern control theory

Spring

32

2

Lecture

Written exam

S016132

Electrical testing technology

Autumn

48

3

Lecture

Written exam

S016105

Electromagnetic field in electrical machines

Spring

48

3

Lecture

Written exam

S016106

The general theory of alternating current machine

Autumn

48

3

Lecture

Written exam

S016171

Theory and technology of HVDC and flexible AC transmission (English)

Autumn

32

2

Lecture

Written exam

S016209

Principles of power system economics (English)

Spring

32

2

Lecture

Written exam

S016170

Control system dynamics (English)

Spring

48

3

Lecture

Written exam

S016205

Renewable Energy and Distributed Power Generation (English)

Spring

32

2

Lecture

Written exam

Specialized Elective Courses

S003111

Design and Application of Thermal Control System

Spring

32

2

Lecture + Discussion

Written exam

≥5 credits for design, practice and case courses  


S003226

Power Station Thermal System Design

Spring

32

2

Lecture

Written exam

S003234

HVAC Engineering Design

Autumn

32

2

Lecture

Written exam

S003324

Solid Waste Treatment and Disposal Engineering Design

Autumn

32

2

Lecture + discussion

Written exam

S003325

Air Pollution Control Engineering Design

Spring

32

2

Lecture + discussion

Written exam

S016212

Comprehensive practice of power system

Autumn

64

4

Lecture


S016210

Comprehensive practice of power electronics

Autumn

64

4

Lecture


S016176

Comprehensive practice of motor and its control system

Autumn

64

4

Lecture


S016178

Case course of situation analysis of interconnected power grid

Autumn

16

1

Lecture


S016180

Case study on new problems of power electronic power system

Autumn

16

1

Lecture


S016182

Power electronics and motor system design case course

Autumn

16

1

Lecture


S016181

Case course of comprehensive evaluation of distribution network operation

Autumn

16

1

Lecture


S016179

Case course of high voltage and insulation technology

Autumn

16

1

Lecture



Other new courses  










Integrated Quality Training

Professional Practice

No less than 12 months of professional practice accumulatively (no less than 6 months out of University)

6


Non-exam


Lectures on Humanities and Scientific Literacy

Students are required to attend at least 8 lectures, including at least 1 compulsory lecture on academic atmosphere construction, law and psychological health (at least 3 lectures for part time graduate students and international students).

1


Non-exam


Academic Activity Participation and Academic Writing Practice

Students are required to participate in at least 2 academic activities, and write 1 academic paper.

1


Non-exam  


Note:   

(1) The minimum credits for master students: 26 credits for degree postgraduates majoring in engineering, with at least 16 credits for compulsory courses; the curricula and credit requirements for degree postgraduates of other majors are subject to "Full-time Master's Degree (Classification) Postgraduate Guidance Training Program" (Degree Office [2009] 23).

(2) All compulsory courses are normally required to be completed within one year after registration.

(3) Compulsory courses and public elective courses are subject to this course plan; specialized elective courses can be chosen from “Graduate Courses Catalog”.

 (4) At least one full English course.